Acura Integra Type S (2024–2026) · Cold air intake

Is a Cold air intake Worth It on a Acura Integra Type S?

Short answer · Depends

A freer-flowing air filter and piping replace the factory airbox path so the engine can ingest air with less restriction, usually with a louder induction sound. For the 2024–2026 Acura Integra Type S (DE5 Integra Type S (2024–2026 US); shares the FL5 Type R powertrain family with model-specific exhaust/trim parts), On a stock tune, most street cars gain little you can feel; any real power usually shows up once an ECU tune is calibrated for the intake. Treat brand dyno claims cautiously—they are often best-case runs. Typical cost: Typical $200–$500 (kit). Difficulty: Easy (hand tools). In California and other CARB states, look for a CARB EO number for your exact vehicle or the part may not be street-legal and can fail smog. This page is general guidance—I am not claiming a personal install on every Integra Type S kit listed in search results. Where I have filmed related Type S / shared Civic-Integra installs, those guides are linked below.

Typical cost
Typical $200–$500 (kit)
Difficulty
Easy (hand tools)
Time
~1 hour

Worth it if…

  • You understand this is primarily about sound/feel more than peak power on a stock tune
  • You will verify fitment for your exact Integra Type S before buying
  • You are willing to install carefully or pay a shop

Skip it if…

  • You expect guaranteed dyno numbers from a product page
  • You need a guaranteed CARB-legal street setup and the product has no EO
  • You are about to sell the car and want zero modification risk

Will it fit my car?

What it does

A freer-flowing air filter and piping replace the factory airbox path so the engine can ingest air with less restriction, usually with a louder induction sound.

Typical gains (cautious)

On a stock tune, most street cars gain little you can feel; any real power usually shows up once an ECU tune is calibrated for the intake. Treat brand dyno claims cautiously—they are often best-case runs.

Fitment notes for the Acura Integra Type S

DE5 Integra Type S (2024–2026 US); shares the FL5 Type R powertrain family with model-specific exhaust/trim parts. Confirm Type S (not base Integra A-Spec). Many FL5 Type R parts look similar but hangers, tips, and calibrations can differ—verify DE5 fitment. Always match chassis code / generation.

Install difficulty

Easy (hand tools). Plan about ~1 hour.

Emissions / legal caution

In California and other CARB states, look for a CARB EO number for your exact vehicle or the part may not be street-legal and can fail smog.

Related filmed installs

PRL high-volume intake and titanium turbo inlet installs on the Civic/Integra turbo family are on this site. Confirm DE5 Type S listing vs Type R before you order.

What to search for

Use: Acura Integra Type S 2024-2026 cold air intake. Amazon and eBay links are tagged searches—not invented ASINs.

Buy / parts links

Affiliate links: I may earn a commission at no extra cost to you. Prices change; confirm fitment with the seller. Amazon links use tag 8324894-20; no invented ASINs.

Related on ngooyen

FAQ

Does a cold air intake add horsepower to a Acura Integra Type S?

Usually little you can feel on a stock tune alone. Real gains tend to show up with a proper tune and supporting mods.

Is a cold air intake hard to install on a Integra Type S?

Easy (hand tools). Budget about ~1 hour.

Will this void my warranty?

In the US a modification alone does not void an entire vehicle warranty, but a dealer can deny a claim for a failure they can show the mod caused. Keep stock parts.

Is it CARB legal?

Only if the specific part or calibration has a CARB EO covering your exact vehicle.

Did you test this exact kit?

Not as a blanket claim for every Integra Type S listing. Related Type S / Civic-Integra guides are linked when I have filmed them.

Updated 2026-11-04. Costs are typical US ranges, not quotes. Check local laws and your warranty before modifying your car.

← Try the mod decision tool