Toyota Camry 2015–2017 CarPlay & Android Auto: Roadnavi Head Unit Full Install

0:00You guys already know, this is the Android head unit, now we can get to the bottom of

0:04the head.

0:05Ooh nice, that's the 10 pin, that's the main business.

0:23You guys already know, this is the Android head unit, this one's for the Toyota Camry

0:28and wow look at the box, very clean white on like a little black font nice graphics right

0:34here with the navigation, steering wheel, what do you think, he likes it, he likes

0:39it.

0:40Anyways, we're going to do a quick unboxing right here real quick. One handed, so stay

0:47tuned. Boom. First thing we see is this nice foam, even little square right here. What do

0:55you think about that? Very cool. Then we have the head unit itself wrapped in this

1:03nice plastic. So we got like layers of foam, so it's good protection. Of course you

1:08You want to have good packaging because some spots are like right here are exposed and

1:16could chip during shipping but looks like everything is good here.

1:20Oh, this bad boy.

1:22Yeah.

1:23Yeah.

1:24Everything looks good here.

1:25You have your harnesses and then you have the head unit itself.

1:28What's this bad boy right here?

1:30More harnesses, wires and whatnot.

1:34Now the reason why we're doing this today is we have a

1:38Toyota Camry coming in. We actually already did a video on this one, but this one he wants

1:44Android Auto, Apple Car Play. So we're gonna have to upgrade it. So with this lasing greatest,

1:50we'll be able to do that. We got the head unit. The first thing we need to do is remove the trim

1:54pieces. Of course, you can use a plastic trim removal. We're just using our hands. We just

1:58pull it off. You can see there's a bunch of retaining clips right there. And the whole

2:02thing, is there a button right here? Oh no, it's just, oh yeah

2:08BAM, very similar to it. Is that a fake speaker hole? There's no speaker in there. Yo, I mean

2:20this is the base model so maybe the premium model's got that. Very easy. And then you

2:25can see we are already at the top it's a 10

2:30mill and then we've got another 10 mill right here. So let's get some 10 millimeters and start

2:34on bolting that. Alright so we removed the two 10s. We're going to put it somewhere safe. So these

2:40are the 10 mills. I usually just put it in the little cup holder and now we can go to the next

2:46step. So we're just going to pop out this lower trim piece now. It's just hanging it held

2:52down by clips if you can show that also. Little four clips right there. Easy way to clean it

2:57too because sometimes this gets really messy. And then you also have the Phillips head drives right

3:02here and here. So we're gonna remove those. Removing those screws.

3:10You remove the two screws right here. You're gonna have to pop this trim off. It's just

3:14held by clips but with the shift knob you need to put this in neutral or sport or whatever you

3:19need to to do to get this thing to wiggle out. Make sure your emergency brake is on

3:24and we're gonna have to slowly just

3:55So we're just in screwing all fours there's one right here

3:58There's one right here, and then there's two on the opposite side, and you're gonna have to take this whole cubby out

4:04so it's annoying that this little shift crap is here, but

4:09Best we can do can you do your best to pull it out already did the top one?

4:27excuse my French and there should be some clips for the cigarette lighter USB and

4:37ox so we're unplugging everything that's on the back of that right so we remove

4:45the big old cubby it's a lot bigger and deeper than you thought and here are a

4:52better look at the two cables now we can get to the bottom of the head unit

5:00remove the cubby you can see the two 10s and that's going to be what's holding the

5:04rest of the head unit in so unscrew the 10 here that's fine sound now we still

5:15have this really ridiculous thing right here just pull out the the the head unit

5:21You want me to get a towel or something?

5:27Just so the because there's metal brackets in this piece. We're not replete we're not replacing pull it up again. I

5:34just want to cover

5:36Your trim pieces right here

5:38Then we're gonna be unplugging everything from the back

5:42so

5:43They're held like little clips. These are the very familiar Toyota style and this is just the back of the head unit

5:49Yeah, you can't see it from your angle.

5:53So I'm just gonna unplug it and we're gonna be, thank you for going.

5:57Alright, so welcome to the present time.

6:01This head unit, so all this stuff is removable right here, um,, what you're able to put

6:06the new head unit, the, um, Roadnavi.

6:10So it's gonna be amazing, we have these plugs right here, let me just go over it

6:15if we haven't gone over it it yet.

6:18have, this is the antenna for FM and AM. This one is the 28 pin from Toyota. Generally it

6:25carries serial controls, sometimes backup camera, reverse signal trigger, same with this one. This

6:38one looks like it maybe be carrying the backup camera too, or the serial controls. So Toyota

6:48likes to change it up over the years so it makes it kind of a pain in the butt for compatibility.

6:53This is your main wire right here you got the 10 pin this controls everything pretty

6:59much the main source of power accessory power ground front speakers left and right of course

7:07illumination sometimes this one actually has the reverse camera too.

7:13But yeah it's only 10 pins so you can't have everything in this one wire this one

7:17right here carries the reverse speakers not reverse speakers the rear speakers

7:22left and right six pin this right here is an add-on we just did

7:30for the USBs but you're pretty much gonna have these five harnesses that you

7:36want to adapt to and we'll get to that right now. Now Roadnavi provides us

7:42with a pretty nice thing right here so we're gonna hook it up it has all this

7:54CAN bus stuff right now actually can we have my my assistant right here

7:58actually plug it in so he doesn't really install Android head units I'm just

8:01going to make it so it's pretty easy for anybody because they're really one size

8:10you can only fit one plug with a certain size so you can't mess it up as you as

8:18you as you can tell like you're like wow this does not look looks like five plugs

8:22right there's more than five plugs here too for seven they do that for

8:27compatibility again like I told you oh look at that it's really out of over

8:32exposed check this out so so plug in what you can and yeah let's see how it goes

8:41let's start with these white these white ones first because those are the main

8:44wants it. Oh nice that's the 10 pin that's the main the main business yeah six

9:01pins but it does look like eight because of the four by two layout but it's

9:06missing too. That's for the antenna for FNAM. There you go. Just like a USB. So do we have

9:28like five of them plugged in or missing? We're missing that 28 pin, right? Which is that one

9:33right there. It also has the included USB. So we have the USB right here. We're going to plug one right here.

10:01and there you go that's the setup we have right there five five plugs plus the

10:10USB external this one we are not using yeah so then we're gonna

10:29all of this everything's plugged in place up everything we plug in here pretty

10:33much just plug this bad boy right here you're like you're pretty much golden

10:39it works first someone just get it in a general location and you can start the

10:44car or not start the car just put the car in accessory mode see if it works

10:48oh that's that's a relief so we're just checking audio everything works so far

10:59terms of sound where we got wire I got the radio right now touch buttons work

11:07and the steering wheel controls because we might have to plug in the steering

11:11wheel controls negative negative so we have to do the steering wheel controls

11:14and we're gonna go through all that we're just going through the menus and

11:17make sure everything works which is good next thing we should try is Bluetooth

11:22so let's get that Bluetooth going so we got BT-6012 and then on our phone

11:28We see it. I think it's we're trying to pair it

11:32They have S10 right there. Boom. And we do have this protective film

11:37So if it looks a little dull, it's because we have that going on right now

11:42Alright, so we have everything plugged in. We, we're just gonna shoehorn everything back inside and we can

11:48can go through the interface and more in depth, but right now we have it installed kind of like that. Check it out

11:54Pretty simple. Pretty easy

11:56Alright everyone so we have the road Navi installed here look at it it's so

12:04beautiful I know it's a bit hard to see can we remove this