Dasaita 10.2" Android 11 CarPlay Head Unit: Toyota Corolla 2014–2016 Beginner Install

0:12What's up? Yeah, it's your boy John and today we're gonna be taking a

0:16a look at something cool head units. So always like of the Decida this one's

0:24going to be going in the Corolla. So we'll do a slight unboxing. We have the

0:29manuals of paperwork, the harnesses and the unit itself. Alright so here's the head

0:40unit in all its glory. It's really beautiful piano finish. It's very shiny.

0:47It does have a little the little screen protector on the bottom with the the

0:51side of brandy. Attach that there with the the newer style looks like they have

1:00the harnesses all right there for you. You guys got a diagram. Generally you don't

1:06really have to need a look at this. It has to be

1:07plug-and-play. Cool antennas, Wi-Fi, we need a screw-on. FM AM radio and

1:16tenon goes right there. These are the accessories that you'll you know for

1:21extra USBs and stuff which is in the box too. But this head unit is pretty

1:28stacked and it also shows the manufacturing date right here.

1:34Alright so I'm gonna remove this trim piece right here. It's very simple. I hit it

1:39with the side piece right here. You generally want to do it like a spot where

1:42you can't see because if you do up here people might be able to see that,

1:45so here you never have that issue and these are all held by clips so make

1:54sure you don't pull too hard because it is plastic and it could be brittle over time.

2:00So this side one is the most difficult. So I kind of have it right here. There's

2:09going to be two plugs. One for your SRS light. It just shows a light for your

2:14airbag and you hit this little notch right here. Again right here. Did you want close-ups of those?

2:22Oh that's fine. There's a little it's a little notch. Oh alright so there's there's

2:27two ten millimeters here two-tens. Hopefully my gun can reach it.

2:34Put this somewhere safe. So there's two tens right here it is a little hard

2:46to see but we just hit it from here. So how to get an extension. One thing is you,

2:55don't want to drop these bolts into the unknown because it falls under there. They're

3:02gonna have a hard time fishing it out and it's just, gonna rattle. So be careful when you

3:06remove, after you remove those it does just pull out. Now be careful because these

3:17brackets are very sharp and you don't want to scratch your interior so the

3:22shift knob is usually what takes the abuse. So just kind of pull it out and

3:26then you're just going to individually remove each wire. Now you're not going to

3:33retain all these wires. Some of these are USBs. Some of these are XM radio antennas.

3:40For sure there's no XM on the new radio which could be a deal-breaker for some

3:46but you could use your app or use your phone, carplay that that's something

3:53you want. So some of these are just kind of plugged in through the top so you

4:02really need to unplug these. So they kind of just loop. Just kind of interesting.

4:09There. You go right there. And now we bring out the new unit. All right. So we have

4:32power front audio dimmer

4:34dimmer switch. We can turn on the headlights. That goes to this one right here.

4:38So we're plugging that one in. So we get there. The 6-pin 1, 2, 3, 4, 5, 6 goes to

4:46this one right here. 6-pin. This one controls rear audio which is great.

4:52This is a 28-pin. The 28-pin should slide in nice and tight. This generally does your

5:00steering wheeloi-steer wheel controls. So we got to need that.

5:03And this is a 20-pin, I believe. I don't know exactly. This varies between models. Sometimes it's a reverse camera.

5:12Let's see if we can plug this bad boy in. So every

5:14plug from, every plug from the OEM harness is plugged in right now. This is a USB

5:20which I don't know if we can retain. It depends on the kit. This is for, for the AMFM radio.

5:26So let's plug that one in. So we have everything. Besides, I think your USB is right here.

5:36Hopefully, I might have an adapter. You could buy an adapter on Amazon for $10.

5:41This is the Toyota adapter.� We'll check the bag. It might be included here.

5:57So for Toyota, they do change it up. They have two years USB adapters.

6:02This one and another one. There's a teal one. So let's see if this fits.

6:09So you'll still be able to retain the USB factory USB option which is right here

6:15which is nice. You'll spe

6:27So everything from the back is plugged in besides this one antenna. And this might be a

6:35XM or just another. These circular ones are generally some kind of antenna.

6:41All right. So we're just going to plug in this harness.

6:51There's going to be this, this little white box

6:53or like white pin here. And we're just going to plug in this canvas.

6:57What this does is it allows your car to get some information from your car's system.

7:05Think of AC unit when your doors are open. You know, if you have a kid or anything,

7:10they open the door in the back, they'll say, hey, there's a door open in the back and it'll

7:14show that specific door, which is nice. All right. So just really need to plug in this and we're

7:21going to test if it works. So there's that. And yeah, that is enough for it to be powered.

7:33The USBs and the antennas and the back of camera will wire separately.

7:37So all right, so we're going to start the car in accessory mode and hopefully

7:42we'll be some power going on to this head unit. Yes. So we do have power. So the first thing I

7:49like to check is the power is working. That's a huge leap forward. That means the unit is obviously

7:55operational. But then for me, I like to have audio. So audio, depending on your car,

8:03you might have an amplifier. You see it says the the doors open. There was really nice.

8:07So we are getting that kind of information. It's huge. Let's see if we've got audio. So for audio,

8:18we are getting audio. That's great. Because some of your system, let's say this was a

8:22really high spec carola, you might have the JBL upgraded amplifier. That digital

8:28signal needs to be converted if we didn't have that. But because I think this is the base

8:34unit, the base units are really good for upgrades. You don't really have to worry

8:39about, so this was the original unit we had right here. Yeah. All right. So we have a little

8:47antenna right here. It's a little stubby antenna. And just kind of screw it in here. The reason why

8:55I'm doing this is because when you're doing Bluetooth, you don't need that because there's

8:59a Bluetooth antenna inside. But with wireless, our Apple Apple CarPlay or Android Auto,

9:05, it basically handshakes the Bluetooth. And then it uses your Wi-Fi. So it pairs for higher bandwidth.

9:12All right. So we recently just plugged it in here. We have the main horn is coming out right here.

9:19So this was the everything, everything we plugged in. Remember the 10 pin, the 6 pin, 28 pin,

9:24all that plugged in here. Now we also added the Wi-Fi antenna. This right here is what

9:30you need for the reverse camera. So from the socket A or the connection A, we want the rev V.

9:37I don't know if you guys can get that. Rev V. And you want to plug that into camera. The camera

9:41will go back to this harness right here with the 28 pin. There's actually two camera vins,

9:48two cameras. So there's one here and one here. The reason why they do that is because

9:52the Corolla might change in slightly different, like Toyota changes things. So they do this

9:58compatibility. So we're just going to use this one, obviously, because it's the same thing. It's

10:03like literally just a camera, but our plug plugged into that and we have it kind of moved in here.

10:09Next off, we have these extra harnesses. They generally don't plug into anything, but if you

10:14want a front camera, which we actually plug the reverse camera into front camera first. And it

10:19works as the when you go into the settings to the front camera, but we're not using a front

10:23camera. So if you don't want to hit curves or something like that, when you're doing that,

10:27you can you can mess with that stuff. But it's good. Good to have that capability,

10:32but we're not going to even touch that. And then we have this brown one plugged in too. Again,

10:35this one is for USB. And we have it actually snaked through here. So the let's say the

10:46Wi-Fi needs to charge their phone and is an emergency. You can plug in there. You can

10:51also plug in a USB flash drive or external hard drive. If you have movies or something like that,

10:57you just want to go on a long road trip. This unit actually

10:57has a lot of storage inside of itself too. I think it's something ridiculous.

11:06And then we have the other USB. It's somewhere back here. There you are. So the other USB,

11:13this is from the OEM. So it goes here and it goes to here. And the side actually provides

11:20that harness as well. So there's that. So

11:27can you hit the brakes and put in reverse real quick? So there it is right here. The picture quality

11:34is okay. It looks like something something out from like the early 2010s, but it does work. As long as

11:43you see your bumper and your thing, you're fine. Can you move the steering wheel

11:47real quick? So it doesn't it doesn't move. Sometimes that does move, but in this case it doesn't.

11:54And there's a lot of settings you can change on this too. So if you can get out of the reverse mode.

12:01In terms of reverse settings, you have to go here and then I believe it's car settings or

12:06something like that. So we have to look for it, but you'll be able to make it so when you

12:11reverse, like you can mirror it, you can turn off the volume. So right now it says

12:18reverse volume is off, but you can change it so it does nothing. So.

12:23What am I saying? I'm saying so when you're throwing a reverse, it cuts all audio off,

12:27but if you want to have audio, like it's kind of annoying. People like to have no audio when

12:32they reverse promotion. I guess it heightens their senses and trajectory display. I'm going to

12:38have the owner play with all these settings because, you know, it's just it's just too much

12:43much. We don't have time for this right now. Lots of settings. And for the most part, if I was

12:48an owner of the Corolla, I'm just going to go and car play and mess with the reverse settings.

12:52And I won't even touch anything else. But what next step is we're going to wrap this up,

12:58transfer all this stuff into here and we'll be done. All right. So we're going to pop out the

13:08original trim piece. So there are these like yellow piece right here. You see how it kind of comes

13:13in? I just pushed it in, pushed it in right here. And there's going to be so you, you push in here,

13:19out on this side. So it gets into this really loopy, loopy kind of situation. So on two pins here,

13:27and then the two pins right here. So you can kind of see the slots right here. We're going to

13:31then pop in the new head unit. But you might have, you have to probably transfer the pins.

13:41So right, see how like there's the two pins here and two pins there.

13:46But there is no a pin. So I'm

14:06plastic but it's kind of flexible. And you kind of just that's one and you're

14:20pulling it. You don't want to over exert it because then it'll snap. And then you want these,

14:24at least these top twos right here. But let's just do all of them. Oh, that one going off.

14:34So there's that. These white ones are actually kind of more fragile. So I'll be careful with

14:51these ones a little more. Try to do just two at the same time. There's a lot, they're going to

15:02help their shape better. The yellow ones are a lot more flexible. All right. And then you also

15:13have to, we're going to transfer the hazard buttons. So there's going to be two little

15:19pins right here and you just pop it out. And same with this, but you might need a tool to pry it out.

15:30So I'm going to use this plastic tool to pop it off. So you'll see, you'll be able to see the

15:36little notches right here when you just want to pop it off. So you see where there's

15:44little these notches? They kind of go right there. So, with that, this thing's strip clean.

15:51you can keep that safe when you want to sell the car, return back to stock,

15:56and we're going to get this bad boy. And you just do the opposite. In this case, we are just going to push

16:04it in. So let's get this little thing on. But you only get that snapped in real good.

16:23So I'm going to start from the bottom or the top actually. All right. So

16:33right here, you can see how we kind of sanded it down. When we were putting it in, it would butt

16:40against this piece right here and it would cause some fitment issues. So we shaved it down,

16:48which is a little bit weird, but I actually have the same issue last time too. You can

16:51actually still the plastic shavings. But I filed this down so now The OEM piece has two

16:57little a little little like connection points right here. Which, is lacking on the new unit unit. So

17:08it doesn't latch into anything anymore here, unfortunately. But the good thing is,

17:13clips are. So now we're just transferring the

17:20These little yellow pieces over so

17:23and just be careful. It is tough. And you just

17:44you'll get that good fit. So we're going to actually Soft ground it.

17:48it. There's going to be ground connector. What ground connector is this plug it in anywhere where that metal

17:56and you'll be set. So we're goinghang down the ground. Now we'll have a nice ground.

18:09Are done with the fit, let me just tell you this little

18:13head unit right here was actually kind of a pain. y look at the fitment

18:16on this

18:28, now what we what we had of what we had to do was was on this

18:30it, what we had was on this OEM

18:33a it is on this OEM unit was on this O

18:37was now what it is on this OEM

18:46This, this one right here too, it looks like it was set in the,

18:53but I would say maybe it was all set by, it looked like me or, the,

18:59it was off like, like a, like a millipedic, or two,

19:03like maybe three millimeters.

19:05So we had to shave off, so I mean, this is what we did.

19:09Okay, we just got this.

19:14do it but as an the example, we just did this

19:15and we just broke it, and then we just kind of filed it down like this. So,

19:20imagine if you just just filed it down.

19:22That I did. You can also use a dremel or something like that.

19:28The fitment looks looks great now, lines up all this works, hazard button works

19:58Yes, so all that's good. Yeah, that's it, if you guys were interested,

20:04Oh, yeah, the steering wheel, we have a steering wheel. So, let's let's show that.

20:08We didn't have to set it up.

20:10So, because

20:36and because

20:38it shows that the doors are open and as well as AC,

20:42you can actually see the little temperatures right here too.

20:44so there's a little redundant information.

20:46So,

20:59but go here.

21:02There's like vehicle information so,

21:04maybe,.

21:07So, maybe the OEM had

21:09A, it's

21:39off, b it features small screen mpg let me see if there

23:26literally blood so thank you're watching I