Corsa Cat-Back Exhaust Install on a Subaru BRZ: Sound Test & No Drone
Swap the stock BRZ / FR-S / 86 exhaust for a Corsa cat-back: support the car on jack stands, unbolt the axle-back and mid-pipe, pull the rubber hangers, then bolt the Corsa on with anti-seize on the 13 mm hardware.
Full video (10 min): Corsa Exhaust Comparison/Install (NO DRONE!!) BRZ FRS GT86 86 2013 - 2017 · John's YouTube channel
Get the parts
- CORSA 14864 cat-back exhaust system (Amazon, from the video description)Buy ↗
- Jack stands: Generic pickGeneric pickSearch on Amazon ↗
- Anti-seize compound: Generic pickGeneric pickSearch on Amazon ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
Swap the stock BRZ / FR-S / 86 exhaust for a Corsa cat-back: support the car on jack stands, unbolt the axle-back and mid-pipe, pull the rubber hangers, then bolt the Corsa on with anti-seize on the 13 mm hardware. This 10 min guide covers the Corsa 14864 cat-back exhaust system for the 2013–2017 Subaru BRZ / Scion FR-S /.
Overview
John installs a Corsa cat-back, one of his favorite exhaust brands, on Kim's BRZ. The car goes up on jack stands (two here, though four is better), then the stock axle-back and the pipe back to the cat come off. Getting the pipes off the rubber hangers is the hardest part of the job and takes a lot of twisting. The Corsa goes on the stock hangers, and the 13 mm nuts and bolts that join the cat-back to the front pipe get anti-seize so the threads don't gall. On the cold start it's clearly louder than stock, and John compares it with his own WRX. On the test drive he says there's no drone and no cabin resonance, even with the windows closed, unlike the exhaust he had before that made the whole cabin ring. It's louder than stock outside but not too loud for a daily driver, it sounds good on downshifts, and at about $800 he thinks it's a good price for a good exhaust.
Vehicle & fitment
- Product
- Corsa 14864 cat-back exhaust system
- Shown on
- Kim's 2016 Subaru BRZ (6-speed manual), compared with John's 2015 WRX
- Corsa 14864 cat-back exhaust system for the 2013–2017 Subaru BRZ / Scion FR-S / Toyota 86 (per the video title)
- Bolts on to the stock front pipe; same FA20 engine as John's WRX, per John
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
- Floor jack and jack stands (four is safest)
- 13 mm socket and wrench
- Anti-seize compound
- Rubber hanger removal (pry bar or lubricant helps)
Parts
- Corsa 14864 cat-back exhaust
- Stock exhaust hangers (reused)
Step by step
- 1
Sound comparison▶ 0:00
A quick listen to the stock exhaust before the swap.
- 2
Lift the car safely▶ 2:21
Put the car on jack stands. John used two, but four is the safe way to do it.
- 3
Remove the axle-back and mid-pipe▶ 2:34
Unbolt the axle-back, then the section back to the cat, and work the pipes off the rubber gaskets and hangers.
Tip: The hangers are stubborn. Twist and work them off slowly.
- 4
Hang the Corsa▶ 4:07
Mount the Corsa on the stock hangers so it's loosely in place.
- 5
Bolt it to the front pipe▶ 4:24
Use the 13 mm nuts and bolts to join the cat-back to the front pipe. Put anti-seize on the threads so you don't mess them up later.
- 6
Cold start▶ 5:24
It's clearly louder than stock on the cold start. John compares it with his WRX as a reference.
- 7
Drive and drone check▶ 8:01
With the windows closed there's no drone or resonance in the cabin. Louder than stock, but not too loud for a daily driver.
- 8
Verdict▶ 9:19
Louder outside, quiet inside, good on downshifts. At about $800 John calls it a pretty good exhaust for the price.
Get the parts
- CORSA 14864 cat-back exhaust system (Amazon, from the video description)Buy ↗
- Jack stands: Generic pickGeneric pickSearch on Amazon ↗
- Anti-seize compound: Generic pickGeneric pickSearch on Amazon ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
FAQ
What vehicle does this install fit?
It is shown for the Corsa 14864 cat-back exhaust system for the 2013–2017 Subaru BRZ / Scion FR-S / Toyota 86. Bolts on to the stock front pipe; same FA20 engine as John's WRX, per John Always confirm your exact year, trim and factory audio with the seller.
How long does the install take?
John's full video is 10 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.
What tools do I need?
Tools called out in the guide: Floor jack and jack stands (four is safest); 13 mm socket and wrench; Anti-seize compound; Rubber hanger removal (pry bar or lubricant helps).
Where do I get the parts?
Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.
Is this beginner-friendly?
The guide breaks the job into 8 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.
John's Subaru WRX
More photos →Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (65 lines) +
1:01Love it
2:21We're got jack stands for safety safety is very important
2:26Only got two though usually you want for I mean sometimes you can half ass safety
2:34Just got to remove the axle back
2:37and then I'm gonna move remove the cat that
2:41With the
2:43right there and that should be it
2:46Gotta get it off of this rubber gasket
2:55All right, we got Kim a co
2:58Trying to remove the hanger the legendary. Hanger says
3:03whoever moves that hanger
3:05will become
3:07the king of
3:10Frey
3:11Yeah, twist it. Yeah, you go super saying just do the grunt sound
3:20Look, look at my hands already, that's okay. That's for Frey Lord.
3:25is the Excalibur Hanger
3:27You're gonna give me a live. I can't do it
3:30You have to grunt woman
3:38The legend
3:43All right today we are at the gym of chemico
3:46We're talking about gains. Can she lift this muffler? It's a stock OEM people. Oh
3:52What
4:02Just rolling oh my god, it's not going to sewer
4:07All right, so it took a lot of hard work, but we just put our stock hangers on
4:15Yeah, get nice and looped
4:21Next off is
4:24Next off is we have the 13 millimeter nut into a bolt
4:32this is probably what's
4:33on a hooked up the cat-back to the cat part of the pipe
4:39When I put some anti-sees that way it doesn't mess the threads up. We, we know we do it once we do it right
4:45We don't want to mess up the the threads. Oh
4:52My god
4:54Yeah, there you go, but I want to write when it's cold, but you know
5:24It is pretty loud. Let's quickly compare this to mine real quick as a reference
6:25But I will let you know if it sounds good
6:30You can definitely tell it's a cold start now over the
6:34Before like when a cold start it didn't even sound like it was loud or anything
6:39right now it is kind of to my ears
6:46Everyone thinks loud is different
7:04It's dead now
7:11Get it off my finger
7:14So your car is faster now
7:19Is it faster or what?
7:23FA20
7:27Same motor as my car
7:34It's taking a little bit easy before it it warms up, geez
7:38It just feels lighter, feels lighter by one pound
7:43I have to tell you that much
7:46I wonder how it makes a big difference?
7:50and it does sound good though, can you hear it?
8:01No drone, no resonance, no weird things, let's close the windows make sure there is no drone
8:10The previous exhaust the whole cabin is just ringing my
8:21That sound constantly this this one does not have it as you can tell right
8:28Now it doesn't join in this car
8:33If you guys were looking for something that's louder than stock this is louder than stock
8:38but it's not loud it's perfect especially for a DD you don't want it to be too loud
8:59Some downshifts
9:04Sounds good on the downshifts
9:12I think this is good, very good
9:19So just test drove the car around the exhaust sounds a lot louder on the outside
9:25There's no droning on
9:31It's a pretty good exhaust for like 800 so it's still you know good price for a good exhaust
9:39No droning on the inside which is a plus on the outside it's decently loud and I love the
9:46exhaust, pretty good
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.
Next step








