LightingSubaru

Diode Dynamics SmartTap Relay on a Subaru WRX: Fix LED Hyperflash

Swap the 2015+ WRX's flasher relay for a Diode Dynamics SmartTap to stop LED turn-signal hyperflash: one bolt and a clipped trim panel, move the white clip to the new relay, then see the lock flash and wig-wag modes.

Black Friday & Cyber Monday CarPlay deals →

Swap the 2015+ WRX's flasher relay for a Diode Dynamics SmartTap to stop LED turn-signal hyperflash: one bolt and a clipped trim panel, move the white clip to the new relay, then see the lock flash and wig-wag modes. This 5 min guide covers the Per the description: 2008–2017 Subaru WRX / STI, 2013–2016 BRZ / FR-S, 2017 Toyota 86.

Overview

John's new LED bulbs made the WRX hyperflash. Diode Dynamics sells a cheaper non-smart relay, but he went with the SmartTap for the extra functions. Pry off the trim panel from the bottom with a flat-head (there's a small notch to start it), remove the one bolt, and the panel comes off on its clips. The relay sits behind it. The stock relay was hard to pull, so he took the white clip off first and moved it onto the SmartTap, which slides right in. Then a night demo with Kim's BRZ: the lock flash keeps the lights on for 10 seconds, and the wig-wag and slow strobe run through the mirrors and front signals. His Subispeed tail lights keep sweeping, while the BRZ's Valenti Revos stay lit.

Vehicle & fitment

Product
Diode Dynamics SmartTap CF18 / LM449 LED flasher relay with hazard strobe, wig-wag, tap-to-turn and lock-flash functions
Shown on
John's red 2015 Subaru WRX (LED turn-signal bulbs, Subispeed sequential tail lights)

Always confirm fitment for your exact year and trim with the seller before buying.

Tools & parts

Tools

  • Flat-head screwdriver or trim tool
  • Socket for the single panel bolt

Parts

  • Diode Dynamics SmartTap flasher relay

Step by step

  1. 1

    The problem▶ 0:30

    The new LED bulbs hyperflash. A replacement relay fixes it. Diode Dynamics makes a cheaper non-smart one, but the SmartTap adds functions.

  2. 2

    Remove the trim panel▶ 1:07

    Start at the very bottom with a flat-head. There's a small notch for it. Pop the clips, remove the one bolt holding it, and the trim piece comes off.

  3. 3

    Find the relay▶ 2:00

    The SmartTap replaces the relay behind that panel.

  4. 4

    Move the clip▶ 2:12

    The stock relay was hard to pull out, so John removed the white tab/clip first and transferred it to the SmartTap. It slides right in.

  5. 5

    Lock flash demo▶ 2:55

    Lock the car and the lights stay on for 10 seconds. The Valenti Revos on the BRZ stay lit while the Subispeed tails keep sweeping.

  6. 6

    Wig-wag and slow strobe▶ 3:47

    Wig-wag runs through the front signals and mirrors. Slow strobe is the hazards on with the stalk pushed left.

Wiring notes

FAQ

What vehicle does this install fit?

It is shown for the Per the description: 2008–2017 Subaru WRX / STI, 2013–2016 BRZ / FR-S, 2017 Toyota 86 and many 2000s–2010s Toyota, Lexus, Scion and Subaru models (full list in the video description). Plug-in replacement for the factory flasher relay; no wiring changes Always confirm your exact year, trim and factory audio with the seller.

How long does the install take?

John's full video is 5 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.

What tools do I need?

Tools called out in the guide: Flat-head screwdriver or trim tool; Socket for the single panel bolt.

Where do I get the parts?

Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.

Is this beginner-friendly?

The guide breaks the job into 6 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.

John's Subaru WRX

More photos →
Which taillight is your favorite? Digging through some photos, totally forgot I had this many taillights in one periodMeanThe time I tinted my taillights. Clear on the left, tinted in the right. I didn't like the look so I took it off the same day

Photos from @ngooyen on Instagram. Follow for more.

Full transcript

Show the full transcript (47 lines) +

0:30All right, so you notice that I got hyper blinking on the new LED bulbs.

0:36Make sure you guys replace it with a relay Diode Dynamics make some really cool smart relays

0:43Go check them out. It's a really cool extra functionality

0:46They actually have the regular non-smart ones for a little bit cheaper

0:49But might as well upgrade to a smart relay

0:52To prevent something like this and give you extra functionality. Let's get it today

0:56We're gonna install the smart tap relay

1:00It's gonna prevent my car from hyper

1:07All you have to do is take out a one bolt and a panel piece right here

1:11use a flat head you can

1:14Just go to the very bottom and pop it out

1:21In the bottom you just

1:23Some clips and if you can see from the bottom right here, there's a little nudge you can put your flat head screwdriver in

1:30Once you do that you unscrew the bolt that's holding it in together, which is this one right here

1:41That's a

1:43You'll be able to this whole trim piece now. It the just being held by clips

1:49Yes, I know I have a lot of wires

1:52That's how it is with me

1:54Take the camera

1:56And folks I can point out to you guys right here

2:00The smart tap is gonna be replaced. It's gonna be replacing this relay right here

2:07No idea how to take it out

2:10Okay, so

2:12Yous remove this thing out right here

2:14I pulled out the white tab first because I was having a hard time to just take it out

2:18So just take the white tab out and transfer into your new smart relay by

2:23dynamic

2:30So I'm just transferring the new

2:33The old clip to the new Diode Dynamics with a little of harness thing. It just slides right in

2:55All right, so these are the jk cars

2:58Let's start with the lock one two three

3:08So you can sell right there 10 seconds on each look the mighty fine

3:16The thing with the Subispeeds is they keep on moving while the Valenti Revos does not keep on flashing

3:25Lock in three seconds three two one

3:30That's locked

3:33See how notice how the revos they stay lit the Subispeeds they continue to blink

3:47And let's show the wigwag function because that's super duper cool

3:52All right, so you can see right there the Subispeeds even though it's on wigwag

3:57It still blinks the

4:09Where Subispeeds do not

4:13Going around the front

4:16It's awesome wigwag from the brz and the super wrx

4:26Nice you can tell right there

4:29In my mirrors are doing the thing

4:36And now we have a slow slow motion

4:41stroke

4:43It's pretty cool too, and that's why I'm moving the turn signal to the left with the hazard on

Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.

Next step

Related install guides