Hidden 32-Inch LED Light Bar Behind the WRX Lower Grille (Auxmart)
John tucks a $40 Auxmart 32" LED light bar behind the lower grille of his 2015 WRX so it's invisible when off: bumper off, test-fit 32" vs 22", zip-tie mount, wire it to the JDM DRL switch, then day and night light tests.
Full video (16 min): Hidden 32 Inch Lightbar Install, Rice or nah? (Auxmart $40 Lightoutput) DIY · John's YouTube channel
John tucks a $40 Auxmart 32" LED light bar behind the lower grille of his 2015 WRX so it's invisible when off: bumper off, test-fit 32" vs 22", zip-tie mount, wire it to the JDM DRL switch, then day and night light tests. This 16 min guide covers the A 32" bar overhangs the WRX's lower grille opening a little.
Overview
Light bars usually stick out too much, so John mounts his 32" Auxmart bar way back behind the WRX's lower grille, where you can't see it when it's off. With the bumper off (nine bottom clips, the top clips, and two side pieces), he compares a 32" and a 22" bar. The 32" overhangs a little, which is why people often remove the grille. He tucks it all the way back, held with the bar's hardware and sandwiched in place, a temporary setup so he doesn't have to drill or make brackets. The bar does block part of the lower grille, but he checked temps and the upper grille still breathes. He removed the protective shroud. For power, he wired it to the switch he'd already run for his JDM DRLs. The description links a harness if you need one. Night tests show it fills the dark area below the headlights and lights up the ground and the grille mesh. He's impressed with the output for $40. Rice or nah? You decide.
Vehicle & fitment
- Product
- Auxmart 32" single-row LED light bar (about $40, per the title card), hidden behind the lower grille and wired to the existing JDM DRL switch
- Shown on
- John's red 2015 Subaru WRX (front bumper removed for the install)
- A 32" bar overhangs the WRX's lower grille opening a little; tucked far back, it's hard to see when off
- He checked coolant temps with the bar behind the lower grille and saw no issue (the upper grille still flows air)
- The Auxmart bar shown isn't on Amazon, and the description's Amazon links are a different brand, so no buy links are listed
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
- Trim clip removal tool
- Screwdriver / socket set for the bumper
- Wire tools for the switch hookup
- Zip ties
Parts
- Auxmart 32" LED light bar with mounting hardware
- Wiring harness with relay and switch (optional; John used his existing DRL switch)
Video chapters
- 0:00Project introduction
- 1:13Bumper removal
- 1:47Light bar fitting
- 2:57Temporary installation
- 4:19Wiring and placement
- 6:33Lighting demonstration
- 10:50Final review
Step by step
- 1
The idea▶ 0:00
A cheap 32" light bar, hidden so it doesn't stand out. The key is how it fits and how well it works.
- 2
Remove the front bumper▶ 1:17
Pull the nine bottom clips and the clips on top, and the bumper pops up. Don't forget the two side pieces.
- 3
32" vs 22"▶ 1:44
The 32" bar overhangs the lower grille opening a little, which is why people often remove the grille. A 22" fits inside, and small 4" pods are another idea.
- 4
Tuck it back▶ 2:45
He tucked the bar all the way back in the lower opening. It blocks part of the lower grille, but he checked temps, and the upper grille still breathes.
- 5
Temporary mount▶ 4:18
With the protective shroud removed, the bar is held with its hardware and sandwiched in place, tight enough that he doesn't expect issues. No drilling or custom brackets.
- 6
Wiring▶ 5:47
He wired it to his existing JDM DRL switch. If you need one, use a harness with a relay and switch. He plans to separate the DRL and light bar circuits later.
- 7
Is it visible?▶ 6:35
With the bar off, you can barely see it even from low angles. Turned on, it fills the dark area under the headlights.
- 8
Night test▶ 9:02
Headlights, fogs, high beams, then the light bar. Aimed at the ground, it lights up the road ahead and the grille mesh.
Wiring notes
- Powered from the switch John had already wired for his JDM DRLs, so turning off the DRL turns off the bar too.
- For a standalone setup, use a harness with a relay, fuse and switch.
FAQ
What vehicle does this install fit?
It is shown for the A 32" bar overhangs the WRX's lower grille opening a little; tucked far back, it's hard to see when off. He checked coolant temps with the bar behind the lower grille and saw no issue (the upper grille still flows air) Always confirm your exact year, trim and factory audio with the seller.
How long does the install take?
John's full video is 16 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.
What tools do I need?
Tools called out in the guide: Trim clip removal tool; Screwdriver / socket set for the bumper; Wire tools for the switch hookup; Zip ties.
Where do I get the parts?
Parts are listed in the guide; confirm current links and fitment with the seller.
Is this beginner-friendly?
The guide breaks the job into 8 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.
John's Subaru WRX
More photos →Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (80 lines) +
0:00So today we're gonna install the light bar. I'm gonna install a light bar from Oxbeam 32 and then you have the wiring harness too
0:37all right today we're going to install the light bar we're going to install a light bar from Ox beam 32 and then you have the wiring harness too it's very affordable and you going see the how it's going to
0:53fit in my car how well it's going to work so that's going to be a big key hold up myig be thinking we we don't we going Ro
1:12the all right what's up guys so I remove the front bumper pretty easy it wasn't too bad let me zoom out for you guys wasn't too bad all you have to do is remove the nine bottom clips and you just remove the clips on top and it pops
1:27right out don't forget the two side pieces ooh look at that bumper so looking good got the bumper out again not too bad just take your
1:44time see how the light bar fits right there so you can tell right here we're looking down here we have the 32in light bar which pretty much overhangs a little bit that's why people usually remove their Grill because you're not using all
2:01the lights which is I don't think I don't mind that then you have your 22in bar right here so how does the 22in bar looks like does not I mean if you measure it it's going to give you a good idea of how it's going to look so right there
2:17there's a 22 in and this is idea that I kind of want these small like four 4 iners kind of plop them right here over even mounted them that's kind of cool or even since
2:32there's no um fence here you can mount them right here I've seen some people Mount them right here so you get a lot of ideas trying to brainstorm what I can do right
2:56now all right look at this boys a as you can tell I have it tucked all the way down there and the way I know you're like it does block the radiator and check the temps this might not be a
3:11temp this might be a temporary thing this is not something I might keep permanently but air will go through here and then flow through the back kind of thing and to hit the just the bottom portion remember we have two grills on our cars and the top mount of course is
3:26up there so we have two grills not too of a big a deal and let me just show you the light bar on and off so on off I still have the protective
3:43shroud on it right now I actually kind of like it it kind of stops the uh reflection thing so kind of like it without it I with it on yeah that's how it looks like pretty bright hard to tell these headlights are
3:58bright as hell I have my high beam on right now I know whatever but yeah so this is the fitment right now um it's a test fit have have everything bolted down but this is not a tutorial this is just how it's going to look like on someone's car so if you
4:01But yeah, so this is the fitment right now to test fit
4:06having had everything bolted down
4:08but
4:10This is not tutorial. I was just how it's gonna look like on someone's car
4:13So if you want to look at a DOI why you can look
4:18All right, so I did end up removing the shroud thing and
4:23To it is on here really good like on there pretty tight
4:32um don't think I'm going to have issues I could bount it straight up but for a temporary ghetto fix I think this is going to do just fine um if I decide to keep the light bar you know let me know if you guys say Hey you know light bars are kind of ricey 2017 rice or if you're
4:49like hey it's cool all the cool kids are doing it let me know but um I'm going to keep it like this because I don't want to drill stuff into my car or make brackets and stuff as you can tell right here it is pretty far back um I know a
5:07lot of people have it more forward I'm trying to go incognito mode I even talked about tinting this or spraying this the Chrome housing with black to get it really nice and stealthy that's just the like the look I like you know these limited headlights the base Mall
5:22have really Chrome headlights I hate that same with this I hate the Chrome um but I'm hoping because it's so far in it's so dark uh that the chrome doesn't really reflect because if the Chrome's reflecting anything it's reflecting the inside of that Grill so just reflecting
5:31So dark that the chrome doesn't really reflect because if the chrome's reflecting anything it's reflecting the inside of that
5:37grill
5:38So it's reflecting the inside of the grill
5:42Don't really have to worry about too much about this chromium thing
5:47Yeah, I have to wire it to my DRL harness
5:51What you can do is that there is your own you can buy this harness and it comes with
5:56The
5:58You know this stuff right here. I heard this the light right, here the light buttons really bright the way my DRLs is
6:14that to a switch so I can turn off and on my drls so I might have to turn off these fog lights off
6:33all right guys so here is the light bar install what do you guys think what do you guys think and you might be asking dang I don't really see it I mounted it really
6:49far down like even this low you can't even really see it so let me tilt the camera where you might be able to see it am
7:04up up
7:32all of glory
7:35Change the ISO. I'll keep it the ISO the same
7:42That way we know what's going on
7:44So my eyes it kind of looks like this right now
7:49All right, so it's like 12
7:521 p.m. And
7:55It's my garage
7:56There you have it right there. You can see it shining. It just fills in a little bit of the ground
8:10there you have it right there you can see it shining just just feels just fills in a little bit of the ground it's not even that much it's pretty bright it's bright but because it's behind all that
8:26stuff it's getting a lot of it blocked out
8:41so I'll show you guys how with the high beams on pretty much you can still see you see that diamond formation right there you can actually still see the LEDs it's
8:57actually really bright so it fills in the lower portion of the headlights um let me show you how the headlights look like without that bottom piece so it just fills in the
9:02Um, let me show you how headlights look like without that bottom piece
9:09So I just filled in the area
9:13We'll see light bar on
9:17Feels in that area
9:21Wow, I'm actually pretty shocked. I didn't think it would fill it that much
9:26So that's what the light bar on headlights high beams
9:30beams keeping it pretty low I'm very impressed with the light output very impressive set you guys down for a
9:54bit right there boom wow that really opens up the light so I mean obviously that that increased the brightness a lot know it's not the best example
10:10but from going from something like this to this it's just the way I have it if I have it pointed down really low so it really lights up this portion down here
10:27and here it is oh that's pretty sexy let's do a pant
10:47shot yep all right so here's the light bar install guys don't worry about the fingerprints and the birp poop the car is kind of dirty but I have the light bar installed um if you can go down a little bit we
11:03can just check out the light bar I have it I have a 32in light bar behind this kind of hard to see because I have it tucked in way in the back I actually like this look because sometimes those the reflectors are really too Chrome and
11:18I don't I don't like that style so I tricked it all the way back some people do it a little more forward this is how I did it this is a 32 in so it's you it's actually wider than the uh the holes you see on the grill the lower Grill but I I just did all of it um you
11:36can't really see it let me turn it on I'll make a little more clear for you guys check it
11:54out so that's with the light bar um you can tell it still penetrates through which is cool more of a look thing um it does give me some usable light I really pointed it to the ground so it's
12:10especially if you're if it's that far tucked in you're not going to get a good look of it shining everywhere because basically almost half of the light bar is underneath the the uh behind the bumper so it really focuses light to the
12:25ground and um I plan on having my license plate back on uh so that's going to cover even more if not I can always get a plate delete with a Whatchamacallit a side a license holder
12:40whatever to relocate what do you think how it looks like does it look pretty good I think it looks good it kind of looks kind it looks really cool that it has that kind of glow to
12:57it are you able to get it really low yeah and it's so white makes it makes the uh the L Grill look really menacing cuz it lights up
13:12the mesh I have it wired to a switch um it made it easier for me to install because I already had a switch wir to my JDM DRL so right now I have it wired to my JDM DRL so if I press the switch it will
13:28turn off my URLs too and three two one switch you can tell the JDM drls turned off too I plan on having those wired separately but the
13:40turned off too. I plan on having those wired separately but the way it is right now.
14:01check this out right here so we have a wall there is that light right there so it's not too dark we have the car set up
14:16here and I'm going to turn on the headlights very bright fog lights very bright the fog light really shines the ground um you can see it is doesn't really affect too much and then this will be the high
14:35the high beams. I'm trying the fogs. High beams. Yellows. And then we'll do the
14:47light bar. There's a, a little light bar. Kind of cute. Not that right. It's bright but
14:53all the light is focused on the ground anyways. So yeah you can see that it really shines the
15:05really shines the light on the ground because I have it pointed to the ground so I'm going to just have the light bar on headlights on light bar off you can see it really doesn't affect
15:24lights just shines it on the bottom and then lastly fogs really light them up fog lights off I mean I mean light bar off so it pretty much just covers
15:40that Center piece fills in that void but overall looks pretty badass it cleans up the look this kid throwing stuff at this guy
15:55on the bike I'm going to get out of here before they start throwing shoes at my car damn kids these days
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.
Next step








