WRX Burble Map: Phatbotti Tuning Crackle Tune on a Q300 Exhaust
Ron Watson at Phatbotti Tuning added a crackle (burble) map on top of John's E-tune. With a quiet Q300 cat-back and a cat, the pops still hit hard; John says it drives normally and recommends adding it if you're tuning with Phatbotti.
Full video (5 min): How to make your exhaust POP! Burble map by Phatbotti Tuning · John's YouTube channel
Get the parts
- Invidia Q300 cat-back exhaust on John's WRX (Amazon link from the description)Buy ↗
- Phatbotti Tuning (burble map and E-tune, link from the description)Buy ↗
- Phatbotti Tuning FAQ and pricing (link from the description)Buy ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
Ron Watson at Phatbotti Tuning added a crackle (burble) map on top of John's E-tune. With a quiet Q300 cat-back and a cat, the pops still hit hard; John says it drives normally and recommends adding it if you're tuning with Phatbotti. This 5 min guide covers the Per the description, you must get a full tune from Phatbotti first.
Overview
Ron Watson at Phatbotti Tuning put a crackle-pop (burble) map on top of the E-tune he'd already done on John's WRX, and John says it made him fall in love with the car again. The demo is mostly sound: foot on, then off, to let it crackle. His Q300 cat-back is a pretty quiet exhaust, so it isn't loud overall, but the pops hit hard; with a louder exhaust it would be more extreme, and since he still runs a cat it won't shoot flames (he mentions a friend with a similar Q300 setup whose car shoots small fireballs). He switches between his other tune maps and says the car still drives perfectly normal. Inside it's not that loud, but outside it pops, and he thinks they did a really good job. His advice: if you're getting tuned by Phatbotti, add the crackle map. You need a full tune from them first. The 2018 description also mentions a $50-off offer when you mention John's name; confirm with Phatbotti before you order.
Vehicle & fitment
- Product
- Phatbotti Tuning "Phat Crackle Pop" burble map, added on top of an existing E-tune by Ron Watson
- Shown on
- 2015 Subaru WRX (John's red car: E-tune by Ron Watson, Invidia Q300 cat-back, still running a cat)
- Per the description, you must get a full tune from Phatbotti first to get the burble map
- John's exhaust is the fairly quiet Invidia Q300 cat-back, and he still has a cat, so his car pops but doesn't shoot flames
- This is a tune you buy from the tuner, not a part you install
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
Parts
- Full tune from Phatbotti Tuning (required first)
- Burble / crackle map add-on
- Cobb Accessport (the tuning device on John's car, per his mod list)
Video chapters
Step by step
- 1
Crackle tune demo▶ 0:00
Sound clips of the burble map. It's simple: foot on, then off, and let it crackle.
- 2
A quiet exhaust, hard pops▶ 2:42
The Q300 is a really quiet exhaust, so the car isn't loud, but the pops hit hard. With a louder exhaust it would be more extreme. He still has a cat, so it won't shoot flames; a friend with a similar Q300 setup gets small fireballs.
- 3
Switching maps▶ 4:09
He compares it with his other tune maps and says the car drives perfectly normal on the crackle tune.
- 4
His recommendation▶ 4:40
If you're getting tuned by Phatbotti, get the crackle tune on top of your existing tune. Inside it's not that loud, but outside it pops. You need a full tune from them first.
Get the parts
- Invidia Q300 cat-back exhaust on John's WRX (Amazon link from the description)Buy ↗
- Phatbotti Tuning (burble map and E-tune, link from the description)Buy ↗
- Phatbotti Tuning FAQ and pricing (link from the description)Buy ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
FAQ
What vehicle does this install fit?
It is shown for the Per the description, you must get a full tune from Phatbotti first to get the burble map. John's exhaust is the fairly quiet Invidia Q300 cat-back, and he still has a cat, so his car pops but doesn't shoot flames Always confirm your exact year, trim and factory audio with the seller.
How long does the install take?
John's full video is 5 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.
What tools do I need?
Basic hand tools and a plastic trim tool cover most of this install; see the Tools section for the full list.
Where do I get the parts?
Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.
Is this beginner-friendly?
The guide breaks the job into 4 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.
John's Subaru WRX
More photos →Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (15 lines) +
1:38It's pretty simple. You just have your foot on.
1:43Then you give some
2:35I'm about to get the fibbed it's strong huh you're behind there recording how
2:42do I feel yeah the Q300 is a really quiet exhaust so the exhaust isn't loud but
2:56the pops, the pops hit hard imagine if I didn't have the Q300 and have a more
3:03nutty now I also have a cat so that definitely probably won't let me shoot
3:14flames I, I know my debut channel has a Q300 very similar exhaust setup as me but
3:26his shoots little fireballs
4:09to your old tune I your old tune but your other tune my rev 8 and I drive
4:15perfectly normal insane and let me just enjoy this crackle tune let me just do
4:22s acceleration didn't pop that time so when I happens it makes me smell guarantee it get
4:40the crackle tune there's no reason why nod to if you're getting tuned by fat boy
4:43get the crackle tune on the top of your existing other tune options
4:49not that loud
5:00but outside it pops, they did a really good job
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.
Next step








