$6 WRX / STI 3D Fender Side Badges Install (2015–2018)
Swap the factory fender side badges on a 2015–2018 WRX / STI for $6 black-and-red 3D badges from AliExpress: pull the old badge without popping the fender clip, clean with rubbing alcohol, press the new one on and hold it.
Full video (5 min): $6 SHIPPED! Fender Badges Install WRX/STi 2018 2017 2016 2015 (4k) · John's YouTube channel
Get the parts
- Genuine Subaru OEM black fender badge pair for 2015–2021 WRX / STI, the pricier option (Amazon link from the description)Buy ↗
- 3D WRX / STI fender side badges, pair (AliExpress link from the description)Buy ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
Swap the factory fender side badges on a 2015–2018 WRX / STI for $6 black-and-red 3D badges from AliExpress: pull the old badge without popping the fender clip, clean with rubbing alcohol, press the new one on and hold it. This 5 min guide covers the AliExpress listing is for 2015+ Subaru WRX / STI fender badges (link from the.
Overview
A quick, cheap mod: black WRX side badges with red lettering for about $6 a pair shipped, compared with $40 or more for the name-brand version. On a white WRX, the factory fender badge comes off by prying it away from the fender. Open the door for clearance, and don't pop off the fender-liner clip next to it. If you do, push it back in. The old badge is just adhesive. Clean the spot with rubbing alcohol so there's no grease left and the new badge sticks through a hot summer. Peel the backing and you get one shot at placement, so line it up and press hard, massaging it in for 10–15 seconds. Next to stock, the new badge sits a little raised, just like the factory one. Red works on almost any color; John has seen blue WRXs with the red-and-black badge too.
Vehicle & fitment
- Product
- Black-and-red 3D WRX fender side badges (pair) from AliExpress, about $6 shipped
- Shown on
- White 2015+ Subaru WRX (filmed with John Paul); fits 2015–2018 WRX / STI fender badge locations
- AliExpress listing is for 2015+ Subaru WRX / STI fender badges (link from the description)
- The badges stick on with adhesive; the fender liner clip next to the badge should stay in
- The description's Amazon link is the genuine Subaru OEM black badge set, the pricier option
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
- Plastic pry tool or fingernail
- Rubbing alcohol
- Clean microfiber towel
Parts
- 3D side badge pair (adhesive backed)
Video chapters
- 0:00What we're installing
- 0:36Removing the factory badge
- 1:36Prep the surface
- 2:02Apply and press the new badge
- 2:36Compare with stock and final look
Step by step
- 1
What you're getting▶ 0:00
Black-and-red WRX side badges for a few dollars on AliExpress. Subispeed-style versions cost far more.
- 2
Pry off the factory badge▶ 0:36
Open the door for clearance and pry the badge off the fender. It's held on by adhesive only.
- 3
Leave the fender clip alone▶ 1:04
There's a fender-liner clip next to the badge. Don't pull it out with the badge, and if it pops, push it back in.
- 4
Clean with rubbing alcohol▶ 1:36
Wipe the area with rubbing alcohol so there's no grease or leftover adhesive. That way the new badge stays put in summer heat.
- 5
Apply and press▶ 2:02
Peel the backing carefully. You only get one shot at placement. Press as hard as you can and massage it in for 10–15 seconds.
- 6
Compare with stock▶ 2:36
Like the factory badge, it sits a little raised. Red and black works on most colors.
Get the parts
- Genuine Subaru OEM black fender badge pair for 2015–2021 WRX / STI, the pricier option (Amazon link from the description)Buy ↗
- 3D WRX / STI fender side badges, pair (AliExpress link from the description)Buy ↗
As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.
FAQ
What vehicle does this install fit?
It is shown for the AliExpress listing is for 2015+ Subaru WRX / STI fender badges (link from the description). The badges stick on with adhesive; the fender liner clip next to the badge should stay in Always confirm your exact year, trim and factory audio with the seller.
How long does the install take?
John's full video is 5 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.
What tools do I need?
Tools called out in the guide: Plastic pry tool or fingernail; Rubbing alcohol; Clean microfiber towel.
Where do I get the parts?
Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.
Is this beginner-friendly?
The guide breaks the job into 6 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.
John's Subaru WRX
More photos →Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (42 lines) +
0:00We got some side markers that we're going to be installing today as well as a front emblem and it looks like a rear emblem.
0:09How much did you buy all this for?
0:11Well, it's actually not as expensive as I thought.
0:14It's like $3.00.
0:15Yeah.
0:16Soobie Speed sells it more expensive, but I'll put the links in the description below if you want to get for like a $3.00.
0:21Well, they kind of just waived it back before.
0:36Try to pry it out.
0:39Watch.
0:46You want to open the door so you can have that more clearance.
0:56There you are, you got that piece of pulling off.
1:00There you- diss. One clip off.
1:04There's a clip, right?
1:05Yeah.
1:05So you got the clip off.
1:07Are you pulling off the fender? You're supposed to be pulling off this.
1:10This, like this, right?
1:12Yeah, there you come.
1:17You popped off the clips for the fender too.
1:20Well, I think that and it's just all adhesive.
1:28, there you go.
1:29Now you guys know don't pop off that clip.
1:36do with you would you like use rubbing alcohol and then let you wipe it down so he gets a really clean there's no grease so when you apply your next badge it's really adhere well you don't want to fall off during a hot summer
1:58get it Jan was peeling off like the entire thing I was like I was not gonna agree to he's got one shot please open this number no just push as
2:02Yeah, I was peeling off like the entire thing.
2:04I was like, I was not going to work.
2:08I only got
2:08one shot.
2:10Oh, there we go.
2:12Should I open this up?
2:14No, just push as hard as you can.
2:16Put on, keep it there.
2:18Push, massage it in.
2:23And then just keep it pressed down for like 10 seconds.
2:2610 to one 15 the 15 seconds to just count off.
2:40so yeah so we'll compare it to the stock one so there is a little like a nail kind of can fit but I'm pretty sure that's how it is in the other stuff to this the stock one has the same kind of cap pops out a little bit that is much
2:56stuff because it does have a nail but that's just because it's important like embedded though let's shoot it up example of what do you what do you think man it was really nice I can't wait to see it I'm gonna flow with the rest of the car if you recommend this emblem to
3:13anyone else um yeah definitely if it's part of your color scheme but I mean I've definitely seen blue WRX has brought the the red black side badge so register kick oh this looks good right what do you do I
3:29don't have this all right
3:44you
4:26should we go with John Paul you too slow you actually finish
4:35. All right, face. We are with John Paul. You too. We actually finished.
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.
Next step








