Subaru

How to Vinyl Wrap the WRX / STI Front Bumper Lip (S207-Style Overlay)

Give a 2015+ WRX or STI the two-tone black front lip look with a pre-cut Premium Auto Styling S207-style vinyl overlay: pull the lip trim, clean the bumper, squeegee from the top center outward, then tuck the edges.

Black Friday & Cyber Monday CarPlay deals →

Give a 2015+ WRX or STI the two-tone black front lip look with a pre-cut Premium Auto Styling S207-style vinyl overlay: pull the lip trim, clean the bumper, squeegee from the top center outward, then tuck the edges. This 4 min guide covers the Premium Auto Styling S207-style bumper lip overlay for the 2015–2017 WRX / STI; the description says.

Overview

The 2018 WRX got a black lower lip, and John wanted to copy that look on his red 2015 with a pre-cut vinyl overlay from Premium Auto Styling. He says the material is top notch and easy for a beginner. First he pulls the front lip piece so the film can wrap around the edge, then gives the bumper a really thorough clean. With a squeegee he tucks the film into the top line first and works down from the center, fanning out toward the bottom. Instead of trimming the extra at the bottom, he tucks it behind the lip, which looks cleaner. The edges came out right and the result is a two-tone look like the 2017s or the Evos. It's quick, easy and changes the look of the car. If he can do it, you can do it.

Vehicle & fitment

Product
Premium Auto Styling Bumper Lip Overlay, S207 style (2015–2017 WRX / STI): one-piece pre-cut adhesive vinyl with a high-gloss black finish
Shown on
John's red 2015 Subaru WRX (STI front lip)

Always confirm fitment for your exact year and trim with the seller before buying.

Tools & parts

Tools

  • Squeegee
  • Car-safe cleaner and microfiber towel
  • Trim tool to remove the front lip piece

Parts

  • Premium Auto Styling S207-style bumper lip overlay (one piece)

Step by step

  1. 1

    The plan▶ 0:15

    A pre-cut vinyl piece for the front bumper lip from Premium Auto Styling, to get the black look the 2018 WRX has.

  2. 2

    Remove the lip piece▶ 0:27

    Take off the front lip first so the film can wrap the edge cleanly.

  3. 3

    Clean the bumper▶ 0:57

    Clean the front bumper really well so the adhesive sticks.

  4. 4

    Start at the top▶ 1:27

    Line the film up and tuck it into the top line with the squeegee first.

  5. 5

    Work down and out▶ 2:13

    From the center, fan out toward the bottom. Start with the top, work down, then finish the bottom.

    Tip: Work in small passes so you don't trap air.

  6. 6

    Tuck instead of trimming▶ 2:28

    With the lip portion removed, John tucked the extra film behind it instead of trimming. It looks a lot cleaner.

  7. 7

    Result▶ 2:44

    The edges came out clean. A fast, easy change that gives a two-tone look like the 2017s or the Evos.

FAQ

What vehicle does this install fit?

It is shown for the Premium Auto Styling S207-style bumper lip overlay for the 2015–2017 WRX / STI; the description says it fits all 2015+ WRX / STI. One-piece pre-cut adhesive film, removable without damage (per the description) Always confirm your exact year, trim and factory audio with the seller.

How long does the install take?

John's full video is 4 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.

What tools do I need?

Tools called out in the guide: Squeegee; Car-safe cleaner and microfiber towel; Trim tool to remove the front lip piece.

Where do I get the parts?

Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.

Is this beginner-friendly?

The guide breaks the job into 7 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.

John's Subaru WRX

More photos →
Which taillight is your favorite? Digging through some photos, totally forgot I had this many taillights in one periodMeanThe time I tinted my taillights. Clear on the left, tinted in the right. I didn't like the look so I took it off the same day

Photos from @ngooyen on Instagram. Follow for more.

Full transcript

Show the full transcript (19 lines) +

0:00Another day another video see what we can do with the Subaru looks like we're

0:15gonna try to install a vinyl wrap piece from premium auto styling it's the front

0:21bumper little lip thing the new 2018 WRX has that black look let's see if we can

0:27replicate that first off probably got to remove this it's my infamous auto

0:57let's clean up the front bumper really strong

1:27let's try to start applying got my squeegee here

1:57alright guys so far you can see what is going on right now I tucked it to the top

2:13line with a squeegee and I just kind of bumped it in like this I'm gonna work my

2:18way down so we're from the center of that I start fanning out to the bottom so

2:23you want to start with the top piece work down and then work it to the bottom

2:28that's it let's get it so look at that I'm pretty good on top I removed my front

2:34lip portion a little bit so I can just tuck the rest in there just take it

2:38off I was gonna trim it but this will look a lot cleaner let's go alright

2:44there it is guys check it out you know it's glory edges are really good I

3:21and good it looks pretty badass and there's nothing else to save but easy to install very

3:31fast changes the look make it look like kind of like 2017's or the evos and all that stuff

3:37two tone I have this coming in or I do have it in not sure if I'm gonna install it yet to

3:44recap premium auto styling front lip links in the description below and where to get it looking good

3:51and what else say leave your question below I mean if I can do it you guys can do it

Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.

Next step

Related install guides