Hansshow Amber Lower Grille Light Bar: Tesla Cybertruck Install

0:22What's up everybody we got the Honcho Cybertruck Lower Grover LED Light Bar Kit.

0:29I already unboxed it, but it comes with 6 LED lights, trim trim tool, some wire n, and some zip ties.

0:42So it it is going to be going down here, so this is what the light strip looks like if you just put it on the bottom, which I don't see Honcho displaying.

0:54They kind of do kind of a zigzag pattern or all on this third row.

0:59I think it looks pretty cool.

1:03You can't even tell too much during while it's off that it's there.

1:08It looks very OEM.

1:10Very flush, you can kind of see the tabs.

1:15Flush.

1:17No wiggle.

1:24And then I'm thinking, so this bottom bumper might interrupt some of the light input going down, interrupting that angle.

1:32down that angle and so when the honcho installs it, it gets, it's a little bit more light

1:38input towards the ground right here.

1:41But I don't think that matters because you can't really see down here anyways from

1:46the driver's seat.

1:47So I think I'm gonna leave it like that.

1:49Looks really clean.

1:50Since it's not gonna be like gap polite gap gap. It's just

1:55Gap gap gap, and this kind of looks like it's supposed to be there. I

2:01like that. I'm gonna go ahead and connect these and then

2:05We'll go on to the next step

2:08So I started this assembling the frunk

2:10Like I said, Honshow did a lot already on the tutorial in terms of how this assembled

2:17the fronks, but I went ahead and started pre-disassembling it so I can show you what's going on here.

2:24The first piece you're going to disassemble is this windshield trim piece.

2:28It's going to have nothing but tabs, so you're going to see a bunch of tabs.

2:34So you're going to see a bunch of tabs that you just pretty much pull up in the upward motion using that pry tool.

2:40And then you could go ahead and remove this piece.

2:49Yeah, you do need to remove this piece.

2:51You might actually don't need to remove this piece.

2:53But this piece is so easy to remove.

2:55I removed it anyways.

2:56It's still a bunch of tabs using the plastic pry tool.

2:59You'll see where all the tabs just connect and you pull it out.

3:03This is the one that you remove to get to the HEPA filter.

3:07But we're not doing the HEPA filter today.

3:10And then when it comes to the actual frunk, there's these tabs right here that you pull using the pry tool.

3:20And then you'll you'll locate two bolts, two 10 millimeter bolts, and then one 10 millimeter bolt back here.

3:28Same on this side, two 10 millimeter bolts, and then one 10 millimeter bolt on this side.

3:36I went to go ahead and remove the windshield washer reservoir cap right here.

3:41So it just doesn't get in the way.

3:42It was really easy to remove when I removed it.

3:45You also remove these plastic tabs, bumpers for the hood supports.

3:52It's a simple turn kind of clockwise a little bit and then you pull out.

3:59you can see by the angle of this tab.

4:00angle of this tab. That's what you use for that. No tools required on that one.

4:07You simply just turn counterclockwise and you can't get straight up. So I think I

4:14haven't completely removed it yet. But I think that's all you need to do for

4:18that. Let's go ahead and check this. Yeah, just really no resistance. No. Actually, there is a button

4:33right here and some power. So you just have to disconnect this wire and then you'll be

4:43I want to pull out the front.

4:51So with this button light, the one that opens up and closes the hood, all you do is you

4:59pull it right here and then you can see a hole, you want to grip it from here and you

5:04even want to just kind of pull it out like that. And it comes out. And then there you have it.

5:20Access to underneath the the front assembly. It's my first time seeing this. It's pretty wild.

5:27So all these are simple plug and play snaps right into place, to get access behind this

5:32So all these are simple plug-and-play snaps right into place to get access behind this tow hook cover.

5:39All you do is you take off this use this plastic pry tool and you go ahead and pry it all out.

5:46And there's rubber and plastic on outside and four tabs, two tabs on the top, two tabs on the bottom.

5:52Just wiggle it out.

5:54See here, you just take the pry tool on under each of these tabs and pry that out.

6:02I'll give you access to behind the tow hook cover for the one lead, you're not

6:10dealing with multiple wires and then what I like about installing it down here is

6:16you don't have to worry about wires dangling they're resting right behind

6:22the grill insert because if you would install it higher up you would have to

6:27worry about zip tying it for our cleaner wire management. So this one looks like

6:30So this one looks like there's just some phone you stick it through.

6:35And then there you have it right there behind the tow hook cover.

6:39And then you take this wire loom that they gave you and go ahead and connect it.

6:46Might be easier for me to connect it over here since there's not much space for me to deal with

6:56the kids, playing in the background.

6:59Then, connect it. These connectors are really,.

7:07They're not going to loosen this over time.

7:21So you just match up the arrows, push in, that's it.

7:25There we go. Now that I've connected, I could have a little more leverage to pull it out and feed it through here.

7:31and feed it through here.

7:35Tustle is awesome®.

7:36They already knew that we were going to mess with and then they pre-wired some power

7:41for us right here.

7:42how it looks like. This is how it looks like

7:46from the factory untouched.

7:50They already have pre-wired for us for us to

7:53install any accessories. I've seen some people install like

7:57microwaves and ovens in front extra outlet so we're going to use this power

8:10And the great thing about this is we're not messing with any switches on the inside.

8:16It's already pre-wired. No plastic switches that go out of place.

8:21There's already a button to fix the UI.

8:28Yeah, so I finished up the wires.

8:32All you do is you connect the Hancho's red wire right here to Tesla's red wire.

8:41Tesla's red wire is red and blue.

8:44And then you use, this is the, they give you Hancho gives you two wire nuts.

8:53I dropped one. I'm such a klutz.

8:55I used my orange ones for the ground or the negative.

9:01So you can Hancho black one to Tesla's brown and blue wire.

9:10And then yout'll see in Tesla's wire loom, the one that's right here, they'll have an.

9:17It's just some lights, nothing too crazy.

9:22And then,,...

9:24, but let's go ahead and show you.

9:31back but let's go ahead and show you spew you what it looks like when you turn on the lights.

9:37To turn on the lights it's not going to be under the lights tab of the Tesla it's going to be

9:43under the outlets and mods. So you don't need any extra cheap switches or drill holes in your interior to

9:51turn it on and off for auxiliary switches. Tesla has already hooked it up and

9:56included within the software a power feed front button so you turn that on that

10:03button will power up the honcho lights and then you can have different options

10:10here you could keep the outlets on outlets will remain on for 12 hours so

10:13you could keep these lights on for 12 hours while the Cybertruck is

10:18off I mean you could use that for let's just say if you're camping over

10:22night and you want some lights to light up the ambient area around you these nice

10:34So let's go see what it looks like with the power feed front on.

10:38Here we have it.

10:55I can't believe how cheap these are.

10:57I mean, retail right now, they haven't listed at 300, but they're on sale for around 100 bucks.

11:04Super clean look.

11:06You can already see with the light bouncing off of the bumper.

11:09It's going to be a decent amount of increased intensity.

11:12So I'm going to go ahead and clean up the wires and go ahead and put everything back.

11:15And then I'll go ahead and show you what the light output looks like at night.

12:34I'll see you in the next video.