OEM Illuminated Carbon Fiber Door Sills: Acura NSX Install

0:00What's up guys? It's your boy John. We're back again here with another video. This is going to be more NSX content

0:05So if you were interested in that perfect. All right for what we have here is going to be the door seal

0:10So I want to keep this car very OEM plus. The last video was kind of about the floor mats

0:17looking clean

0:18I really want the interior to look a little bit more spicy. So I got the door seals

0:24What are� our door seals? They're pretty much the piece where you kind of step on

0:29to get into the car. Now these are illuminated. So they're going to some power boom right here

0:36So there's some harnesses and then we have carbon fiber illuminated door

0:42So now it's in the space packaging left. So it's probably on the driver side and then you got right

0:50for the

0:53The space packaging

0:57For the passenger side inside you got this nice egg crate. Packaging for the NSX parts parts are

1:04insane

1:16So I just want to show you guys the quality of the part

1:20If you guys were going to be interested of buying such an

1:25expensive part, but

1:27Hey

1:29Only the best for the NSX

1:31You're hurt

1:33So oh man that weaves nice

1:35They have it kind of filmed here for this is for the left side

1:38So I'm gonna keep the protective cover on

1:42Just

1:43I mean, this is something you'll step on but for now keep it a little bit more minty

1:52All right, so

1:54This should technically go right here

1:58But this will require you to cut

2:02The carpet so that's one thing that's kind of lane

2:05It's the only way these clips can go on it. So it's nice and secure

2:10Alrighty then first you want to do is will these open your door?

2:14Then. I kind of had things already and pulled out but pull up this

2:18Seal it just coming straight out

2:21Then you can pull the carpet out

2:24You'll see the screw unscrew it

2:29Ouch

2:30So it is pretty pointy

2:44Then after that you'll see that there's this blue or this black tape

2:52Take off the black tape

2:55And it will reveal

2:57a plug

2:59And this is the plug you're going to use to power

3:02the door sill

3:05so

3:07Door sill

3:09gets plugged into a harness

3:12And you'll have these little two small pins and you plug it

3:21in

3:24So now

3:26it illuminates

3:29sick

3:30your next stop is um

3:32Well after you find out that it lights up beautifully?

3:37I don't know if I can get them in the sun

3:41You can tell it's lighting up now

3:43and you want to cut these

3:46little things right here

3:48So it'll match

3:51These little pots and you should be set. All right second piece is cut

3:57I put these little

4:00Plastic things just so the little things don't splatter all the place

4:05Even the door is cutting with a dremel

4:08But you can use a needle nose and then you just got to pull this thing out

4:12All right, so after you trimmed all this stuff, which basically is the plastic

4:18underneath like there's a little template

4:20Uh, you should have something like this and then this

4:25also has a little like pivot point right here

4:28Or a little like I guess I don't say put a little hole right there

4:33And now this she should be sitting flush

4:37Make sure the wire is out of the way

4:42tucked in and then pushing

4:44All right. And the package does come with this aluminum tape

4:49So I cut it in half. So it looks something like this

4:52and per the instructions right here

4:56I have it so it's taped. You see the metal tape right here

5:01On the wire and that little channel

5:03And you just have to install everything in reverse

5:06And zip tie all these wires back together

5:11All right. And on the driver's side, it's pretty much the same as

5:25So you can kind of see this is the wire I'm tugging at and that, that's where it's going to be

5:32I had to remove the white

5:34That's not the best angle. I had to remove this and then you can see

5:40Where it's plugged in

5:44All right, that concludes the door sill carbon fiber illuminated oem factory option

5:51For the or dealer option

5:54For the NSX

5:56Um

5:57It is beautiful for sure. Is it worth it? I'll leave it to you guys. It does give that interior

6:03A nice bit of class and more

6:07In a vacation

6:08Of course you can see my premium mats too just making the interior just nice a good spot to be

6:14And then when you close it

6:16See if I can show you guys

6:18It is still lit right there if you can see the word NSX kind of facing outwards

6:24And if you lock the door

6:26It undoes itself or unlights itself locked unlock you see and unlock

6:33It kind of fades out super nice touch

6:36awesome product on the

6:38You guys charge it way too much. Thank you guys for watching. Catch you guys in the next one. Peace