SubaruToyota

How to Bag a BRZ / FR-S / 86: Air Lift Performance Air Suspension Install

Kim's BRZ gets Air Lift Performance air suspension with V2 management and SPC lower control arms: bags in, air lines and harness through the firewall, tank in the trunk, then ride-height presets and a first look aired out.

Black Friday & Cyber Monday CarPlay deals →

Kim's BRZ gets Air Lift Performance air suspension with V2 management and SPC lower control arms: bags in, air lines and harness through the firewall, tank in the trunk, then ride-height presets and a first look aired out. This 7 min guide covers the Air Lift Performance front and rear kits for the BRZ / FR-S / 86 (the Amazon.

Overview

John and Kim bag her BRZ at their friend Nick's garage. The title card lists the parts: Air Lift Performance with V2 management, plus SPC lower control arms and a toe kit. With the car on stands and the wheels off ("that's like the hardest part"), the rear bags go in along with the SPC lower control arms and adjustable tie rod. Each air line runs up through a small hole they cut and plugs into the management. Then the fronts go in, which is easy but time-consuming. For the wiring harness, they used the firewall hole where the sound tube passes through, behind and under the battery, where you have to feel for it. Ground goes on, and the ignition wire taps a fuse. The tank and management sit in the trunk. After the first fill they set ride height, speed-bump height and a stock-looking height. Aired out on the old 17s it's low but not slammed, and strut adjustments plus the TE37s are coming next. The description's spoiler: the new wheels rub on the bags. John's take: if you can do coilovers, you can do bags.

Vehicle & fitment

Product
Air Lift Performance air suspension (front and rear) with Air Lift V2 air management, plus SPC lower control arms and toe kit
Shown on
Subaru BRZ (Kim's car, 6-speed manual), filmed in 2017; the same Air Lift kits are listed for the Scion FR-S and Toyota 86

Always confirm fitment for your exact year and trim with the seller before buying.

Tools & parts

Tools

  • Jack and jack stands
  • Socket set and wrenches
  • Drill or cutter for the small air-line hole
  • Wire tools for the ignition fuse tap and ground
  • Zip ties for tidying lines

Parts

  • Air Lift Performance front and rear air springs
  • Air Lift V2 air management (controller, valves, compressor)
  • Aluminum air tank
  • Air line and fittings
  • SPC rear lower control arms
  • Adjustable toe / tie rod kit
  • Wiring harness (power, ground, ignition)

Video chapters

Step by step

  1. 1

    The plan▶ 0:17

    At Nick's place with the Air Lift Performance V2 kit, SPC lower control arms and a toe kit. It's a lot of work, but it isn't hard.

  2. 2

    Car up, wheels off▶ 0:35

    Lift the car and pull the wheels. John calls that the hardest part, then they start on the suspension and lower control arms.

  3. 3

    Rear bags and SPC arms▶ 1:05

    The rear bags go in with the SPC lower control arms and adjustable tie rod. Each air line runs up through a small hole they cut and plugs into the management (rear right, rear left).

  4. 4

    Front struts▶ 1:48

    The fronts go in next, clipped in place. Easy, just time-consuming.

  5. 5

    Harness through the firewall▶ 2:09

    They routed the wiring harness through the firewall hole used by the intake sound tube. It's behind and under the battery, so you have to feel for it. Then connect the ground. The ignition wire taps into a fuse.

  6. 6

    First fill▶ 3:57

    Pressure goes into the bags and the car rises. The controller had to be reset to get it working.

  7. 7

    Set the presets▶ 5:01

    Program ride height, speed-bump height and a stock-looking height. Everything is adjusted through the air management.

  8. 8

    Trunk setup and aired out▶ 6:05

    The tank and management sit in the trunk, with some wires still to tidy. Aired out on the current 17s it isn't super low yet. They'll adjust the struts and switch to TE37s, which the description says rub on the bags.

Wiring notes

FAQ

What vehicle does this install fit?

It is shown for the Air Lift Performance front and rear kits for the BRZ / FR-S / 86 (the Amazon listings below name the BRZ, Scion FR-S, Toyota 86 and GR86; confirm your year). Installed with Air Lift V2 air management and SPC rear lower control arms with an adjustable toe link (per the title card) Always confirm your exact year, trim and factory audio with the seller.

How long does the install take?

John's full video is 7 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.

What tools do I need?

Tools called out in the guide: Jack and jack stands; Socket set and wrenches; Drill or cutter for the small air-line hole; Wire tools for the ignition fuse tap and ground; Zip ties for tidying lines.

Where do I get the parts?

Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.

Is this beginner-friendly?

The guide breaks the job into 8 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.

Full transcript

Show the full transcript (30 lines) +

0:17my boy Nick was definitely coming through his place and here's the piece do we know what we're doing look you may be asking yourself let's see it's a lot of work but uh shouldn't be too hard go

0:34be too hard we go you we got the car lifted up we have the wheels off that's

0:39like the hardest part right we're gonna work on the suspension lower control

0:44a few moments later Oh so we got

1:05oh so we got the bags installed in the back lower control arms we have the SVC

1:22lower control arms with the adjustable tie rod this I had a hammer out kind of paint the s but cut it out as far as the suspension or the air line goes up here falls through here so each

1:40there's a little hole I cut right here and yeah so rewrite your left plug it into the management now we just gotta knock out the front here's it now look with this oh yes got put the clip on this but it's going

1:59along very easy just time-consuming press so we got the rear bags like we talked about last time we're working on the wiring harness so down there you can see it but where the plug is for the

2:02so we got the rear bags like we talked about last time we're working on the

2:09wiring harness so down there I guess you can see it but where the plug is for the

2:15sound your intake thing we we're using that.

2:18and we're just going to plug it so the intake thing is actually behind this

2:26under the battery you can't see it you just got to feel it we have the

2:30we have the ground wire and the power is not in yet the ignition wires tapped into this fuse right here you know you just can't see but so let me show you the back set up there with these you know it's glory looking good yeah it's

2:47pretty something it's actually a easy job if you did everyday coals then you can do bags fingers crossed because I haven't pumped it up yet

3:05is it going higher I reset it to make it so yes so right now we're doing the

3:35equality

3:57putting pressure into the bag music oh it higher the car reading I gotta reset it to make it work

4:27yo

5:01inside be nice so right now we're doing the adjustments we're gonna do ride height we're gonna do speed bump height stock height just in case I know you wanna a sock and then all these are bag like all air dough so right now this so

5:16I'm used to my stock sitting like how I think the stock car would look like get your dog

5:42this is aired out this is gonna be stark coming

6:07so we got finally finished some of the wires need to be tucked a little bit

6:11better but here's how the trunk setup is what do you think of it can you change over it

6:17it really like it y'all we're tired

6:21air out goes all the way down see what it looks like with the wheels on

6:28wheels come along so this is aired out right now buts but we're gonna have to

6:31is aired out right now but we're gonna have to adjust that a little bit on the strut itself yeah it's not super low but you can

6:48change that with the t37 see we're also going to change that again so I think this is gonna be okay t57 come with the wheels actually a little bigger yeah Seventeen's but the wire

7:03not martyrs writer and taller cutter disciples this fan area helped me a lot static like peace

Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.

Next step

Related install guides