PerformanceSubaru

Subaru BRZ ADD W1 Oil Catch Can Install (20 Minutes)

A 20-minute bolt-in ADD W1 catch can on a BRZ: pop the small cover, tap the PCV-side hose, Teflon the fittings, bolt on the BRZ-specific brackets and route the two hoses. All you need is a 12 mm and a flat-head screwdriver.

Black Friday & Cyber Monday CarPlay deals →

Get the parts

As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.

A 20-minute bolt-in ADD W1 catch can on a BRZ: pop the small cover, tap the PCV-side hose, Teflon the fittings, bolt on the BRZ-specific brackets and route the two hoses. All you need is a 12 mm and a flat-head screwdriver. This 5 min guide covers the ADD W1 catch can kit with brackets made specifically for the BRZ.

Overview

John installs an ADD W1 catch can on the BRZ. The point of a catch can is to stop crankcase blow-by (oil vapor) from going back into the intake, which keeps the valves cleaner and helps the engine see the octane it's supposed to, so there's less knock. The kit comes with brackets made for the BRZ, so it bolts in. Remove the small cover held on by clips, find the PCV-side hose (John points it out next to the brake booster line), and tap into it; you can see the oily blow-by right in the old hose. Wrap the fittings in Teflon tape for a better seal, with the bigger fitting on the intake side, snug them with a small ratchet, move two bolts so the brackets can mount, and connect both hoses. John says it takes about 20 minutes, and the same kit works on the Toyota 86 and Scion FR-S. The only link in the description is ADD W1's own website; there's no Amazon listing for this brand.

Vehicle & fitment

Product
ADD W1 oil catch can kit (BRZ / 86 / FR-S brackets, hoses and fittings)
Shown on
Subaru BRZ (John says the same kit works for the Toyota 86 and Scion FR-S)

Always confirm fitment for your exact year and trim with the seller before buying.

Tools & parts

Tools

  • 12 mm socket or wrench
  • Flat-head screwdriver
  • Small ratchet
  • Teflon tape

Parts

  • ADD W1 catch can with BRZ / 86 / FR-S brackets
  • Hoses and fittings from the kit

Video chapters

Step by step

  1. 1

    Why a catch can▶ 0:00

    It stops blow-by oil vapor from going back into the intake, keeping the valves cleaner, and with less blow-by the octane stays closer to what it should be, so there's less knock.

  2. 2

    What you need▶ 0:23

    About 20 minutes, a 12 mm and a flat-head screwdriver. The kit's brackets are made for the BRZ, so it bolts in.

  3. 3

    Remove the small cover and find the PCV hose▶ 0:50

    Pop off the little cover; it's held on by clips. John points out the brake booster line and the PCV side; the PCV hose is the one you tap into for the catch can, and that one plug is all you need.

  4. 4

    Check the blow-by▶ 1:35

    These weren't even held by clips. You can see oil right in the old hose; that's blow-by from the motor going back into the intake, which is what the catch can is for.

  5. 5

    Teflon the fittings▶ 1:49

    Wrap the fittings in Teflon tape for a better seal. The bigger fitting goes on the intake side. Snug them up with a small ratchet.

  6. 6

    Mount the brackets▶ 2:46

    Pre-mount everything to check fit. He moved two bolts so the two brackets could screw in, then mounted the can.

  7. 7

    Connect the hoses and tidy up▶ 3:14

    Plug in the two hoses (one connects to the bottom fitting), tidy up the engine bay, and you're done. The same kit works on the Toyota 86 and Scion FR-S.

Get the parts

As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links.

FAQ

What vehicle does this install fit?

It is shown for the ADD W1 catch can kit with brackets made specifically for the BRZ / 86 / FR-S. John's tools: a 12 mm socket or wrench and a flat-head screwdriver Always confirm your exact year, trim and factory audio with the seller.

How long does the install take?

John's full video is 5 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.

What tools do I need?

Tools called out in the guide: 12 mm socket or wrench; Flat-head screwdriver; Small ratchet; Teflon tape.

Where do I get the parts?

Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.

Is this beginner-friendly?

The guide breaks the job into 7 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.

Full transcript

Show the full transcript (18 lines) +

0:00right so we have a catch can install going into the BRZ this is by a BB w1 boom and the reason why you want to catch can of course is you're gonna have better performance because it's gonna keep your valves cleaner less knock

0:16because their octane rating centers remain similar to what's supposed to be instead of having that you know blow by happening well that didn't stall so take 20 minutes to get some better performance and it's actually very easy all you need is like a twenty twelve millimeter and that's pretty much it in

0:33a flathead screwdriver and it's gonna bolt in something like right here well this with this kit it's a basically bolt on it has brackets specifically made for the BRZ so it should be pretty easy let's get right into the install do

0:50you want to remove this little valve cover thing right here just that it's just being held by clips and here are two little plugs right here you have this for the brake booster so you don't want to move that but the one without

1:05the clip is what you want to remove now this basically falls right into the block around it basically plugs in right here and that's the PCV side you use that to pretty much if you can follow the hose down to right here my index

1:20finger is you pretty much that's where the catch can is so you're gonna pop right in between these tubes that's all you need is just this one plug so you can just remove it and then put the catch can in between those lines these

1:35one even being held by clips you just pull it out and wallah and you can see there's some oil right here that's just the blow by the motor and that basically goes back into your intake but you don't want that's the whole point of having a catch next thing I'm gonna do is put

1:51some teflon on these little things that just gives it a better seal now this side is gonna be the intake side do you one with the funky the bigger side and you want

2:07tie-in of course and then on this side too if you want to do the same I'm just going to put a sim age of teflon tape on here so you get the better seal Samson schooler

2:24with the hose and make it screw a little bit tighter it is nicer then I think this is a 12 mil if you have a deep socket you can get really tight I'm just gonna use a little ratchet thing to get a snug

2:45voila okay so I have everything mounted pre mounts it just to make sure you might need to unmount these so when you installing it's a little bit easier but it's an it go something like this and this is gonna connect to where you unplug the bottom part and this is gonna connect something like this or something

3:00like this so I have these this bracket installed here it was these two twelve Mills and then I have the bracket that the AV UW provides now I also move these two holes right here snap and screw them these two brackets all right it's

3:19mounted noise and then of course you just want to plug in these little hoses right here and that should be pretty much it so I'm gonna connect this one to the bottom one pretty much it so I have

3:35the both little things plugged in you kind of mess with the closable bucket of course you have this little cover you can pop it back in it just held by clips Wow

3:50I think it looks beautiful tidy up the engine bay a little bit but that concludes it catch-can is now on the Subaru BRZ whether this works for the tio2 8 6 or the Scion fr-s all it took

4:05was at old mill and a flat head screwdriver install time should take around 4 minutes very simple and now it's gonna be able to be just dry being healthy cleaner and hopefully more powerful and this thing needs every little bit it help gets because

4:23this thing right here is the beasts but this is a fun machine as well anyways if you guys we're looking to buy the ad dw1 add one check them out [Music]

4:51whoa

Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.

Next step

Related install guides