SubaruCarbon Fiber

Seibon VS Carbon Fiber Hood Install on a Subaru BRZ (Painted Vents)

Fit a vented Seibon carbon fiber hood to a BRZ / FR-S: pop out and paint the silver vent mesh black, swap the hood, then fine-tune the hinge and latch adjustment so it sits even. About an hour for two people.

Black Friday & Cyber Monday CarPlay deals →

Fit a vented Seibon carbon fiber hood to a BRZ / FR-S: pop out and paint the silver vent mesh black, swap the hood, then fine-tune the hinge and latch adjustment so it sits even. About an hour for two people. This 6 min guide covers the Seibon VS-style carbon fiber hood for the Scion FR-S / Subaru BRZ (part.

Overview

Kim always wanted a carbon fiber hood for her BRZ, and this is a Seibon with six vents. John was never a fan of vented carbon hoods, but in person it looked better than he expected. The vent mesh comes silver, so they painted it black first. Each vent has small tabs on the inside. Bend the tops to pull it out, which is a little tricky. Mist on a light first coat so the paint has something to grab, let it dry, then add more coats (about three). Then the hood swap, which neither of them had done before. With the new hood on, they made small adjustments: pushed it forward and back at the top hinge brackets, nudged it to the right, and raised the latch so it no longer sat sunk in. It took about an hour, mostly fit adjustment. They put the hood at around $800 to $900, so it depends on whether you like the look. They both really like it.

Vehicle & fitment

Product
Seibon VS-style vented carbon fiber hood (six vents) for the FR-S / BRZ, with the vent mesh painted black
Shown on
Kim's 2016 Subaru BRZ

Always confirm fitment for your exact year and trim with the seller before buying.

Tools & parts

Tools

  • Socket set for the hood hinge bolts
  • A second person to hold the hood
  • Masking for spray painting

Parts

  • Seibon VS-style carbon fiber hood
  • Black spray paint (for the vent mesh)

Step by step

  1. 1

    Paint the vents first▶ 0:32

    The vent mesh comes silver. Black looks a lot better, so spray it before the hood goes on.

  2. 2

    Pull the vents▶ 1:24

    Each vent has small tabs inside. Bend the tops to pull it out. It's a little tricky.

  3. 3

    Light first coat▶ 1:59

    Mist on a light first coat so the paint has something to grab, then wait about five minutes between coats. About three coats total.

  4. 4

    Swap the hood▶ 2:53

    Unbolt the factory hood from the hinges with a helper and set the Seibon hood on.

  5. 5

    Adjust the fit▶ 3:55

    Make sure the gaps are even on both sides. They pushed it forward and back at the top hinge brackets and moved it slightly to the right.

    Tip: Most of the hour goes here. Take your time.

  6. 6

    Raise the latch▶ 4:18

    Adjust the latch to pull the hood up a little so it doesn't sit sunk in.

  7. 7

    Done▶ 4:32

    About an hour total. The black vents look much better than the silver mesh.

FAQ

What vehicle does this install fit?

It is shown for the Seibon VS-style carbon fiber hood for the Scion FR-S / Subaru BRZ (part HD1213SCNFRS-VS, Amazon link from the description). A two-person job: most of the hour went into adjusting the fit Always confirm your exact year, trim and factory audio with the seller.

How long does the install take?

John's full video is 6 min. Plan on that much time for a careful DIY install, plus extra if you are new to dash work.

What tools do I need?

Tools called out in the guide: Socket set for the hood hinge bolts; A second person to hold the hood; Masking for spray painting.

Where do I get the parts?

Use the buy links on this page for the unit and any harnesses John used. Some links are affiliate links.

Is this beginner-friendly?

The guide breaks the job into 7 steps with timestamps into the video. If you can remove trim panels carefully, you can follow along.

Full transcript

Show the full transcript (31 lines) +

0:00So this is the carpet we're about to install

0:03So this is the carpet we're about to install

0:32we we did get some black spray paint just to color the vents because right now it's

0:39silver color it kind of looks not so good so we're gonna change it into black

0:44and I think black will look a lot more better so that's what we're gonna do

0:49we'll spray paint it first and then install it afterwards

0:54it's a Seibon carbon fiber hood six vents this costs about 900 but we got it for

1:06a really cheap price so can't wait to see what it looks like

1:24so pretty much this is how you take off the vents there are little tabs on the

1:29inside and I just have to bend the tops to pull it out it's kind of tricky though

1:47all right so we got the vents out and painted black looks a lot better

1:59so just do first coat I like to do is just kind of like to mist it on something to grab

2:10but try for like five minutes I

2:41spread three quotes on the other one

2:47pretty winning today not ideal situation

2:53so I never removed the head before so I don't know what I'm gonna do

3:07you made that shirt you made the shirt it's a poro from

3:37we haven't made any adjustments yet I'm looking at the fit man

3:55so make sure it's even on both sides all right so we made some micro adjustments we

4:18push forward back

4:18in the top mountain the brackets we push this a little bit to the right and now

4:23we're going to put uses latched to pull it up a little bit so then it sits a

4:26little bit higher it's kind of sunk in there then we should be good so guys so we

4:32just finished installing our carbon fiber hood it took us about an hour to install

4:38it I would say the most time it took us was just to adjust it and fine-tune it

4:43just to make it look perfect and then we also have to spray paint the

4:47vents where the mesh part was and now it's black which looks a lot better than

4:52before I really like this hood I would say the total cost for the same carbon

4:57fiber hood would be around 800 to $900 it's pretty expensive but it depends on if

5:04you like it or not what do you guys think I really like this hood

5:22I'm coming right away

Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.

Next step

Related install guides