JOGON Carbon Fiber Window Sill Covers: Acura Integra Peel & Stick
Clean off dust and pollen, mind the seals, then peel and stick the 3M-backed carbon covers over the door sill trim and C-pillar.
Full video (5 min): it's the little things. Carbon Fiber Window Sills! | Acura Integra
Get the parts
White buttons are from the video description. “Generic pick” links are my suggestions, not from the video; confirm fitment and part number before buying. Some are affiliate links, so I may earn a commission at no extra cost to you.
Overview
Overlays for the glossy window-sill trim that shows fingerprints even when ceramic coated. The carbon hides them better and adds a little protection, a simple alternative to PPF.
Vehicle & fitment
- Product
- JOGON carbon fiber window sill / pillar trim covers with 3M backing
- Shown on
- Acura Integra Type S
- Acura Integra (shown on the Type S)
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
- Cleaner and microfiber towel
Parts
- Carbon window sill covers + C-pillar pieces (3M backed)
Step by step
- 1
Clean the trim▶ 1:21
Wipe the trim clean so the 3M adhesive grips as well as possible. Get rid of dust and pollen, even on a freshly washed car.
- 2
Match each piece▶ 1:39
Two sill pieces, plus a piece that goes on the C-pillar. Its spot is obvious once you hold it up.
- 3
Peel and stick around the seals▶ 2:24
Mind the window seals as you lay each piece down, then press it firmly.
Get the parts
White buttons are from the video description. “Generic pick” links are my suggestions, not from the video; confirm fitment and part number before buying. Some are affiliate links, so I may earn a commission at no extra cost to you.
John's Acura Integra Type S
More photos →
Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (22 lines) +
0:26What's up guys? It's your boy John. We are back again here with another video. We've got some more
0:31jogan parts and uh, they're unique. These go over your these parts right here. Now there's both
0:43of them. This is kind of nice for me because this flap is right here. Even though I surrender
0:57and I coated it, it's still kind of prone to fingerprints. The carbon fiber actually kind of
1:03because it's like padded, it kind of hides the fingerprints a lot better than a glossy plaque
1:10material. So we got two here. I'm not sure if we're going to go to where. Oh yeah, that's money up there.
1:21And it's as simple as that. Now the back of it has like the 3M. So you want to make sure
1:28you clean it, wipe it clean so that the adhesive can have the best adhesion as possible.
1:37And uh, I'll
1:39should use those two. I also have, this is a, I'm not too sure what that is. I'm guessing a pillar
1:50but the a pillar is like kind of right here. So it might be this kind of I guess what I would
1:55say the C pillar right here. There you go. That one's pretty obvious where
2:03that one goes. So pop that one in there, pop it in there. And we're going to be pretty much
2:11golden on this side. All right. I just washed my car today so there's not too much dirt or
2:24anything. Make sure there of dust or pollen. Another thing is there are some seals.
2:36So when you apply it in, kind of keep that in mind with those seals right here. All right.
3:47That kind of concludes it. Pretty easy to install. You just peel and stick. You get that look you want.
3:54Maybe a little more protection instead of PPF.. You can just do something like that.
3:59Car looks insanely stormtrooper black and white. A cake.
4:05Carbon-fibered out too. You got the, there's so much carbon fiber on this car now. Rear spoiler
4:13rear apron, side skirts, mirrors, window trim, hood vent, front lip, front grill, inside and out.
4:26Now carbon fiber.
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.