
Gallery 15 photos
Photos from John's Instagram
Follow @ngooyen ↗Related: Civic/Integra iDoing 11.5" guide · Integra CarPlay finder.
Install guides for this car
Rear A/C Vent Install: Acura Integra Type S (DE5) / Civic Type R (FL5)
Add rear passenger vents and USB ports using an AliExpress kit and OEM Honda console parts. Full teardown and reinstall.
JOGON Carbon Rear Diffuser Fin Extensions: Integra Type S (2023–2026)
A 10-minute bolt-on: pop one clip, clean, stick on the pre-preg carbon fins and press for 15 seconds.
iDoing 11.5" Android 13 Head Unit: Civic 2022+ / Integra 2023+ Install, Tips & Troubleshooting
Pull the dash, plug in the iDoing harness and USB audio decoder, fix the reverse-camera trigger and swapped track buttons, and set up 360 cameras.
Radium Billet Coolant Tank: Civic Type R / Integra Type S Install
Replace the crack-prone plastic expansion tank with Radium's billet aluminum kit using the factory mounts and lines.
JOGON Dry Carbon Side Skirts: Integra Type S (2023–2026) Install
Join the 4-piece skirts, add foam where they touch paint, then fasten with the supplied screws, the OEM bottom Phillips and a pop clip.
JOGON Real Carbon Rear Spats (DAG035A): Integra Type S Install
Eight Phillips screws and about 10 minutes: the V2 rear bumper side splitters bolt to the OEM mounting points.
JOGON Dry Carbon Front Strut Tower Brace: Integra Type S / Civic Type R (FL5/DE5)
Pull three 14mm nuts per tower, drop on the CNC mounting plates, join the carbon bar with the Allen bolts and torque.
Suma Performance Wide-Angle Side Mirrors: Integra / Civic 11th Gen Install
Pop off the OEM mirror glass, move the white wiring clips to the Suma glass and snap it back on for blue-tint, heated, convex mirrors.
JOGON V2 Dry Carbon Front Lip: Integra Type S Install (Bumper Stays On)
Assemble the 3-piece lip, enlarge three clip holes per side, clean with isopropyl, and pop it onto the OEM clips with 3M tape.
Cabin Air Filter DIY: Newer Honda / Acura (5 Minutes, No Tools)
Empty the glovebox, unhook the damper, squeeze the sides to drop it, and swap in an activated-carbon filter the right way round.
JOGON Carbon Fiber Window Sill Covers: Acura Integra Peel & Stick
Clean off dust and pollen, mind the seals, then peel and stick the 3M-backed carbon covers over the door sill trim and C-pillar.
Pigenius Custom-Fit Windshield Sun Shade: Acura Integra 2023+
Slide the custom-fit reflective shade into the windshield edges and flip the visors down. It protects the dash from heat and UV.
Acuity 4-Way Adjustable Performance Shifter: Civic 11th Gen / Integra Install
Strip the center console, unbolt the OEM shifter (four bolts), drop in the Acuity unit at middle settings, and reconnect every plug, especially the keyless one.
Extreme Online Store Carbon Front Lip Splitter: Integra Type S Install
A 3-piece, winglet-free splitter that goes on with the supplied 3M tape and alcohol prep. The bumper stays on.
Carismo Carbon Fiber Steering Wheel: Integra Type S / Civic Type R Install
Disconnect the battery, release the airbag, pull the wheel with a 10mm, transfer the switches, trim and springs to the Carismo wheel, and reinstall in reverse.
Carbon Fiber Hood Struts / Dampers: Acura Integra Type S (DE4/DE5)
Use the included fish tool and washer for the top mount on a shock-tower bolt, swap the lower bolt, and the hood holds itself open with a soft close.
PRL Titanium Turbo Inlet Pipe: Civic Type R FL5 / Integra Type S DE5
Unbolt the OEM inlet (10mm and 12mm), fit the titanium pipe and PRL clamps, tidy the vacuum/bracket lines on the FL5/DE5 mounts, and snug everything down.
Acuity Shifter Base Bushings: Civic Type R FL5 / Integra Type S DE5
Strip the center console like a knob swap, pop out the four OEM rubber base bushings, press in the stiffer Acuity pair (top + bottom) and re-torque gently.
Acuity Shift Knob: Integra Type S DE5 / Civic Type R FL5 Install
Pop the OEM collar, loosen the 13mm nut, swap to the Acuity adapter and weighted aluminum knob. Bigger grip, shorter throw feel, red anodized finish.
Boomba Recirculating Bypass Valve (BPV): Civic Type R FL5 / Integra Type S DE5
Loosen the inlet hose, unplug the wastegate connector, remove three 10mm bolts on the OEM plastic BPV, and bolt on the billet Boomba valve the same orientation.
FITCAMX 4K OEM-Style Dash Cam: Acura Integra Install
Drop the mirror and overhead sunglass tray, plug the FITCAMX harness into the overhead power plug, fish the camera lead, and clip the matching cover back on.
PRL High Volume Intake: Civic Type R FL5 / Integra Type S DE5
Swap the OEM airbox for the PRL HVI, reuse the OEM bottom mount and seals, route the MAF harness, then compare induction sound vs stock and the Sprint/Spoon filter.
15mm Wheel Spacers: Acura Integra Type S (DE5) Fitment
Jack the car, fit 15mm hub-centric spacers, and torque Type S / Type R lug nuts to 94 ft-lbs in a star pattern. Mild OEM-plus flush without poking.
Sprint / Spoon Drop-In Filter: Integra Type S DE5 / Civic Type R FL5
Unplug the MAF, pull the rubber nipples and two top clips, drop in the Sprint filter (same element Spoon rebadges), and enjoy louder turbo spool and recirculation sounds.
2 Years of Mods + My Top 5: Acura Integra Type S Walkaround
Every mod on John's Integra Type S after two years: carbon aero, Milltek exhaust, tuned engine bay, Jogon carbon interior, Acuity shifter, Carismo wheel, and his top 5.
1 Year of Mods: 2024 Acura Integra Type S Owner's Walkaround
John's Integra Type S after one year: flush stance on 19s, tint and black roof, Milltek valved exhaust, matte carbon interior, Acuity shifter, rear A/C vents and a PRL / Hondata-tuned engine bay.
OEM Plus Mods: 2024 Acura Integra Type S Walkaround (Lowered, Spaced, Interior)
John's early OEM-plus Integra Type S: H&R springs with 15mm spacers for a one-finger gap, a black roof, dealer extras, Type R red floor mats and a suede console trim.
APR Pre-Preg Carbon Side Skirts: Acura Integra Type S Mod + Install Notes
APR's carbon side rocker extensions clamp onto the Integra Type S rocker, line up off an OEM hole, and bolt on with M6 hardware through drilled holes. John shows the fit, ground clearance and the optional splash-guard setup.
Jogon Carbon Rear Spats: Acura Integra Type S Bolt-On Mod
Jogon's carbon rear bumper spats line up with four factory Phillips screws under the Integra Type S rear bumper. Add a strip of 3M double-sided tape where the top edge rests on the bumper so it can't scratch, screw it in, and you're done.
EOS Carbon Fiber Engine Cover: Civic Type R FL5 / Integra Type S DE5
Extreme Online Store's carbon fiber engine (valve) cover drops onto the Civic Type R / Integra Type S engine in place of the plastic cover. John shows the look on his Integra Type S and why he likes it.
APR Carbon Radiator Cooling Plates: Acura Integra Type S DE5 Install
APR's pre-preg carbon cooling plates fill the gaps above the Integra Type S radiator. They reuse the OEM clip spots; skip the optional drilling by using fender-liner push clips, and trim a little if you run a bigger aftermarket intake like the PRL.
Carbon Front Bumper Overlays: Acura Integra Type S Stick-On Mod
Carbon fiber overlays that stick over the Integra Type S's gloss-black front bumper trim, so you get carbon protection instead of PPF without pulling the bumper. Clean the area, peel the backing, stick it on. John rates the fit about 8 out of 10.
EOS Carbon Extended Spoiler vs the Acura Dealer Spoiler: Integra Type S
Extreme Online Store's carbon extended spoiler for the 2023+ Integra has the same shape as the Honda/Acura dealer carbon spoiler, but it starts a bit higher, flares up more at the ends and has a split-weave chevron in the middle. It bolts on with the existing holes.
EOS Carbon Hood Vent Replacement: Acura Integra Type S Bolt-On Install
Extreme Online Store's carbon hood vent for the 2023+ Integra fully replaces the factory vent (it isn't an overlay). Pop the hood, remove the metal shroud, release the clips and the three nuts, then bolt the carbon vent on and put the rubber grommet back.
Pre-Preg Dry Carbon Front Lip: Acura Integra Type S (DE5) 12-Clip Install
A three-piece pre-preg (dry) carbon front lip for the 2023+ Integra Type S that reuses the OEM mounting points: three button clips on each side piece and six clips on the center piece, plus double-sided tape. No front bumper removal.
Acuity Stage 2 Shift Kit on the Integra Type S (11th Gen Civic Type R Too): Install and Driving Impressions
John installs Acuity's Stage 2 shift kit (short-throw adapter, shifter bushings, centering springs and knob spacers) in his DE5 Integra Type S, shows how the console trim comes apart, and explains how the shifts feel after.
Milltek Road+ Valved Cat-Back on the Integra Type S: Unboxing, Install and Sound vs Stock
John unboxes and installs a Milltek Road+ resonated, valved triple-tip cat-back on his DE5 Integra Type S, then compares it with stock in Comfort, Sport and Sport+: about stock in Comfort, a notch or two louder in Sport, no drone.
NO RUB: Meaty 275/35/19 Advan GT Beyond Fitment on the Integra Type S
John shows his DE5 Integra Type S on forged Yokohama Advan GT Beyond 19s with 275/35 meaty tires, +45 offset, H&R springs, and TPMS — still no rub with three people in the car.
Yokohama Advan GT Beyond Unbox: Integra Type S / Civic Type R Fitment Notes
John unboxes forged Advan GT Beyond wheels in Hyper Platinum Black, +45 offset, and walks the fitment math for an H&R-lowered Integra Type S (and Civic Type R) versus stock +60 wheels and spacers.