Extreme Online Store Carbon Front Lip Splitter: Integra Type S Install
A 3-piece, winglet-free splitter that goes on with the supplied 3M tape and alcohol prep. The bumper stays on.
Full video (7 min): The Cleanest Integra Type S front lip | Carbon Fiber
Get the parts
White buttons are from the video description. “Generic pick” links are my suggestions, not from the video; confirm fitment and part number before buying. Some are affiliate links, so I may earn a commission at no extra cost to you.
Overview
A clean splitter-style lip with no winglet. It gives the nose a "chin" without dropping ride height much. It installs with double-sided 3M tape, no bumper removal, and John didn't even lift the car.
Vehicle & fitment
- Product
- Extreme Online Store (EOS) carbon fiber front lip splitter, 3 pieces, with mounting hardware and 3M tape
- Shown on
- Acura Integra Type S (DE5)
- 2024+ Acura Integra DE5 (per the product link)
Always confirm fitment for your exact year and trim with the seller before buying.
Tools & parts
Tools
- Alcohol wipes (included)
Parts
- EOS 3-piece lip, hardware bag, 3M tape
Step by step
- 1
Prep▶ 2:33
Clean the bumper underside with the included alcohol wipes so the tape is as tacky as possible.
- 2
Stick it on▶ 3:01
Join the pieces, line it up, and press it on with the 3M double-sided tape. You can also screw it in with the hardware.
Get the parts
White buttons are from the video description. “Generic pick” links are my suggestions, not from the video; confirm fitment and part number before buying. Some are affiliate links, so I may earn a commission at no extra cost to you.
John's Acura Integra Type S
More photos →Photos from @ngooyen on Instagram. Follow for more.
Full transcript
Show the full transcript (50 lines) +
0:20What's up guys, it's your boy John. We are back again here with another video. Today we're going
0:25to be working on the Integra Type-S and we're going to be installing a front lip by Extreme Online
0:31Store. This is their new carbon fiber front lip right here. It does come with three pieces so
0:38the shipping is, I guess, easier for packaging and if something happens, if you craft one
0:45you could potentially just replace a piece or something like that. So it is the same
0:49it does with mounting hardware and this design is like a splitter. You can see how it cuts through
0:58carbon fiber. Beautiful. Without increasing too much of the ride height. So let me
1:05just kind of show that right now so you can see right here it would be kind of like this
1:15and you can kind of see it does make the car a little bit lower but not that much. It doesn't
1:21overhang that low and you'll be able to kind of have that smoother more aggressive look.
1:30Now the one thing I didn't like about the stock body is you can
1:35kind of see the nose and you can kind of see the chin right there and I feel
1:40like the nose is so prominent that it looks more masculine if the car had some kind of chin
1:49like a beard or something like that. I know that's a little bit weird but it feels it feels like it
1:55needs some kind of thing on the bottom. I mean, all Rekus cars have it. All Supercars have it
2:00pretty much that more aggressive lower end kind of get that look. If you guys know what I'm
2:06talking about, you know what I'm talking about. So I feel like a front lip is actually really
2:10needed in this car. It's just missing something. The rear is perfect in my opinion.
2:19It has a integrated diffuser. Beautiful. Looks great. The front it's missing that oomph.
2:26So having a front lip from EOS it's kind of really clean it up so and it installs
2:33me pretty easy. It's just going to be some 3M tape that they do provide.
2:39We'll just double-sided tape to show you there's a hardware bag.
2:43And it just has some alcohol tail wipes to make it as tacky as possible.
2:52And you don't have to remove the front bumper so that's always nice.
2:56But yeah, let me just install it real quick and I can probably even just install it
3:01without even lifting the car because I have a 90 degree kind of a press.
3:41So this is just 3M double-sided tape. I haven't screwed it on. Looks pretty good.
3:52And here it is all done. Now I want to take it outside so you can actually really see it.
3:57Can't really see it too well in the garage so let me pull it out.
4:30Here it is. The front lip from the side. See how well it flows. Side profile shot.
4:41Do say it does look stunning. Really fills in all the spots that I wanted to fill.
4:55It's not as aggressive as other front lips on the market. There is no winglet.
5:01So if you don't like the little winglet. If you don't know what a winglet is
5:05it's where the, let's see if you can even see my finger. Where you see this area
5:13there's usually a little swoop that goes up. Kind of like that part right there.
5:18Little swoop. Some people prefer without it. This one does not have it.
5:24so it's a good look. It's just a cleaner, simpler design going for more that splitter look.
5:37But it does have that details where it's not just a piece of flat, you know
5:43some cars just have a flat piece of plastic. This one does have some angles but keeping it minimal.
5:50As you can see it does play off the lines of the front bumper and no longer the
5:56nose right there is protruding as far as the bottom which gives it that kind of
6:02double chin look. If you know what I'm talking about now because it's just not like this.
6:09I don't know if you can even see
6:14see what I just did but you got that kind of the part that sticks out the furthest is actually
6:17the chin now so it doesn't look like it's so derp and the front lip just kind of complements it.
6:27It's not offensive. It's nothing crazy. You can kind of see the side skirt right there
6:36and how it just kind of goes straight through. The side skirt is uh this one is the APR one but
6:45that one is a little bit more aggressive and more offensive. Some people might not like it
6:48because it's too aggressive but what EOS has done here has kept it pretty basic.
6:54It kept it clean. So yeah, good stuff.
Machine-transcribed from the full-length video and lightly cleaned (product names fixed). Watch the video for exact wording.


