JOGON V2 Dry Carbon Front Lip: Integra Type S Install (Bumper Stays On)

0:00What's up guys, it's your boy John.

0:23We are back again here with another video.

0:25We got a video of the Integra Type S with the new J

0:26Jogan front.

0:27This is the version 2 so the V1 looks very similar to the HRC concept.

0:35Now we have the version 2 which is more subtle, not as aggressive.

0:40And let me just show you how it kind of looks like.

0:43There it is.

0:44So it is a nice slimmer model so if you'd like a more sleeker, more like OEM plus, then this

0:51one will be more to your taste if you want to be more aggressive.

0:56Then the version 1 is something that you might want to grab too.

0:59Now right off the bat this is made out of dry carbon fiber so it's very lightweight

1:05and it does come in a 3 piece design so if you crack one piece because it's a front

1:12lip you can just replace that particular one which is nice.

1:18And the installation is pretty straight forward, I use the OEM mounting a little pop it clips

1:23right here with 3M and as you can see right here it all connects through the 3 pieces with

1:31some bolts that came with so I already did that right here.

1:34Pretty self-explanatory.

1:35Two bolts on each side, you can kind of see it right there.

1:42So very easy to install, you don't have to remove your front bumper which I really like.

1:46I don't like messing with the fitment of all this stuff.

1:50Even the dealerships fitment is 1D or it's all the front emblem.

1:55I notice that there's some gaps I'm not really happy about but it is what it�.

2:00So me not removing the front bumper is totally fine with me.

2:04Anyways let's pop up the clips on the bottom.

2:08Let me see if I can show you.

2:10It's actually very dark down here but you're going to see these little pop these clips right

2:15here and those clips are going to correspond with these clips right here so.

2:20Pretty self-explanatory easy install.

2:23So I have this little tool but you could just use a flat head or a prying tool.

2:28Something like this to remove it.

2:31This one just a little bit easier to remove clips because well it's shaped in the way

2:41to pop it out easier and I'm going to be doing a few of these.

2:46And just to show you I just have this little filer that way I just kind of do this

2:55and make the hole a bit bigger. You could use a drill. I just had something like this.

2:59There's just three holes on each side so it's not going to take too long.

3:02Alright so I made the holes a bit bigger here.

3:05Not too much you'll know when you pop the clip in and they fit

3:09without being too much tight of a snug.

3:13Let's see. All fits.

3:15Now I'm going to use some Isopro alcohol to make sure the bottom of the car is clean.

3:21All the clips removed and then you just kind of install it.

3:25Alright. Pretty good.

3:48There you have it. Okay the front lip looks really good.

3:54It's definitely more subtle than the first V1 and some of the other front lips on the market.

4:00These winglets on the side.

4:04I'm going to check it out right there. It matches my wheel fitment.

4:09When I zoom out you can kind of see the fender flares on the wide body type S.

4:15You can kind of see it kind of just matches that so that's a really cool touch.

4:20It doesn't go over the wide fenders.

4:35Very cool. And yeah the fitment is great.

4:39As expected from the Jogin part.

4:42Fits really nicely.

4:45So let me just get the outside. It's sun setting already so

4:49I've got a few minutes of daylight.

4:53There you have it.

4:55The front lip version 2 from Jogin.

4:58Now the version 1 very HRC.

5:01It's great for that OEM plus look.

5:06It has just the right amount of aggression without going too crazy.

5:10You can see right here it doesn't stick out too much.

5:14I noticed a lot of front lips for this car.

5:17A lot of people don't like it how it sticks out way too aggressive like a butchin.

5:22This one doesn't stick out very much at all.

5:26It's a look depending on how you like it.

5:29Here's a fisheye look of it. Looks great.

5:36I like it sticking out a lot.

5:39This one is more subtle which is really nice.

5:42Hit by the side profile right here.

5:45You can kind of see it up the lighting a

5:51You can really see that dry carbon weave in gloss.

5:56Dry carbon just meaning the process how it's made.

5:59Just looks really nice. Flows with the wheel arches.

6:03And you can see the back and it mates up perfectly with the bumper.

6:09Now I have the Jogin Carbon Grill as you can see right there.

6:16And fits fine.

6:20I think if you had just the front bumper by itself without the grill it would fit even better.

6:26But yeah, I like it.